![](http://datasheet.mmic.net.cn/330000/PM7366_datasheet_16444405/PM7366_139.png)
RELEASED
DATA SHEET
PM7366 FREEDM-8
ISSUE 4
PMC-1970930
FRAME ENGINE AND DATA LINK MANAGER
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA,INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
126
Register 0x214 : RHDL Indirect Block Data
Bit
Type
Function
Default
Bit 31 to
Bit 16
Unused
XXXXH
Bit 15
Unused
X
Bit 14
Unused
X
Bit 13
Unused
X
Bit 12
Unused
X
Bit 11
Unused
X
Bit 10
Unused
X
Bit 9
Unused
X
Bit 8
R/W
BPTR[8]
0
Bit 7
R/W
BPTR[7]
0
Bit 6
R/W
BPTR[6]
0
Bit 5
R/W
BPTR[5]
0
Bit 4
R/W
BPTR[4]
0
Bit 3
R/W
BPTR[3]
0
Bit 2
R/W
BPTR[2]
0
Bit 1
R/W
BPTR[1]
0
Bit 0
R/W
BPTR[0]
0
This register contains data read from the block pointer RAM after an indirect block read operation
or data to be inserted into the block pointer RAM in an indirect block write operation.
Note
This register is not byte addressable. Writing to this register modifies all the bits in the register.
Byte selection using byte enable signals (CBEB[3:0]) are not implemented. However, when all
four byte enables are negated, no access is made to this register.
BPTR[8:0]:
The indirect block pointer (BPTR[8:0]) configures the block pointer of the block specified by
the Indirect Block Select register. The block pointer to be written to the block pointer RAM, in
an indirect write operation, must be set up in this register before triggering the write. The
block pointer value is the block number of the next block in the linked list. A circular list of