![](http://datasheet.mmic.net.cn/220000/VPC3200A_datasheet_15512207/VPC3200A_54.png)
VPC 323xD, VPC 324xD
ADVANCE INFORMATION
54
Micronas
*) chroma selector must be set to 1 (CIN chroma select)
4.3. Pin Descriptions
(pin numbers for PQFP80 package)
Pins 1-3 – Analog Component Inputs RGB1/YC
r
C
b
1
(Fig. 4–11)
These are analog component inputs with fast blank
control. A RGB or YC
r
C
b
signal is converted using the
component AD converter. The input signals must be
AC-coupled.
Pins 4-6 – Analog Component Inputs RGB2/YC
r
C
b
2
(Fig. 4–11)
These are analog component inputs without fastblank
control. A RGB or YC
r
C
b
signal is converted using the
component AD converter. The input signals must be
AC-coupled.
Pin 7, 64 – Ground, Analog Shield Front-End GND
F
Pin 9 – Supply Voltage, Decoupling Circuitry V
SUPCAP
This pin is connected with 220 nF/1.5 nF/390 pF to
GND
CAP.
Pin 10 – Supply Voltage, Digital Circuitry V
SUPD
Pin 11 – Ground, Digital Circuitry GND
D
Pin 12 – Ground, Decoupling Circuitry GND
CAP
Pin 13– I
2
C Bus Clock SCL (Fig. 4–3)
This pin connects to the I
2
C bus clock line.
Pin 14– I
2
C Bus Data SDA (Fig. 4–12)
This pin connects to the I
2
C bus data line.
Pin 15 – Reset Input RESQ (Fig. 4–3)
A low level on this pin resets the VPC 32xx.
Pin 16 – Test Input TEST (Fig. 4–3)
This pin enables factory test modes. For normal opera-
tion, it must be connected to ground.
Pin 17 – VGAV-Input (Fig. 4–3)
This pin is connected to the vertical sync signal of a VGA
signal.
Pin 18 – YC Output Enable Input YCOEQ (Fig. 4–3)
A low level on this pin enables the luma and chroma
outputs.
Pin 19 – FIFO Input Enable FFIE (Fig. 4–4)
This pin is connected to the IE pin of the external field
memory.
Pin 20 – FIFO Write Enable FFWE (Fig. 4–4)
This pin is connected to the WE pin of the external field
memory.
Pin 21 – FIFO Reset Write/Read FFRSTW (Fig. 4–4)
This pin is connected to the RSTW pin of the external
field memory.
Pin 22 – FIFO Read Enable FFRE (Fig. 4–4)
This pin is connected to the RE pin of the external field
memory.
Pin 23 – FIFO Output Enable FFOE (Fig. 4–4)
This pin is connected to the OE pin of the external field
memory.
Pin 24 – Main Clock Output CLK20 (Fig. 4–4)
This is the 20.25 MHz main clock output.
Pin 25 – Ground, Analog Pad Circuitry GND
PA
Pin 26 – Supply Voltage, Analog Pad Circuitry V
SUPPA
This pin is connected with 47 nF/1.5 nF to GND
PA
Pin 27 – Double Output Clock, LLC2 (Fig. 4–4)
Pin 28 – Output Clock, LLC1 (Fig. 4–4)
This is the clock reference for the luma, chroma, and
status outputs.
77
GND
AI
SUPPLYA
X
Ground, Analog Component Inputs Front-End
78
VREF
OUTPUT
X
Reference Voltage Top, Analog Component
Inputs Front-End
79
FB1IN
IN
VREF
Fast Blank Input
80
AISGND
SUPPLYA
X
Signal Ground for Analog Component Inputs,
connect to GND
AI
8, 61
NC
–
LV
OR
GND
D
Not connected
Pin No.
PQFP
80-pin
Pin Name
Type
Connection
(if not used
)
Short Description