á
XRT73L04
4 CHANNEL DS3/E3/STS-1 LINE INTERFACE UNIT
PRELIMINARY
REV. P1.0.5
51
Address
The register addresses are presented in the
Hexa-
decimal
format.
Type:
The Command Registers are either Read-Only (RO)
type of registers or Read/Write (R/W) type of regis-
ters. Each channel of the XRT73L04 has eight com-
mand registers, CR0-(n) through CR7-(n) where (n) =
0, 1, 2 or 3. The associated addresses for each
channel are presented in Table 2, (repeated as
Table 7).
N
OTE
:
The default value for each of the bit-fields within
these register is "0".
5.2
D
ESCRIPTION
OF
B
IT
-F
IELDS
FOR
EACH
C
OM
-
MAND
R
EGISTER
5.2.1
Command Register - CR0-(n)
The bit-format and default values for Command Reg-
ister CR0-(n) are listed below followed by the function
of eah of these bit-fields.
COMMAND REGISTER CR0-(N)
Bit D4 - RLOL1 (Receive Loss of Lock Status -
Channel(n))
This Read-Only bit-field reflects the lock status of the
Channel(n) Clock Recovery Phase-Locked-Loop
This bit-field is set to “0” if the Channel(n) Clock Re-
covery PLL is in lock with the incoming line signal.
This bit-field is set to "1" if the Clock Recovery PLL is
out of lock with the incoming line signal.
Bit D3 - RLOS1 (Receive Loss of Signal Status -
Channel(n))
This Read-Only bit-field indicates whether or not the
Channel(n) of the Receiver is currently declaring an
LOS (Loss of Signal) Condition.
This bit-field is set to "0" if Channel(n) is not currently
declaring the LOS Condition.
This bit-field is set to "1" if Channel(n) is declaring an
LOS Condition.
Bit D2 - ALOS1 (Analog Loss of Signal Status -
Channel(n))
This Read-Only bit-field indicates whether or not the
Channel(n) Analog LOS Detector is currently declar-
ing an LOS condition.
This bit-field is set to "0" if the Analog LOS Detector
within Channel(n) is NOT currently declaring an LOS
condition. This bit-field is set to "1" if the Analog LOS
Detector is currently declaring an LOS condition.
N
OTE
:
The purpose is to isolate the Detector (e.g., either
the Analog LOS or the Digital LOS detector) that is declar-
ing the LOS condition. This feature may be useful for trou-
bleshooting/debugging purposes
Bit D1 - DLOS1 (Digital Loss of Signal Status -
Channel(n))
This Read-Only bit-field indicates whether or not the
Channel(n) Digital LOS Detector is currently declar-
ing an LOS condition.
C
HANNEL
3
0x18
CR0-3
RO
RLOL3
RLOS3
ALOS3
DLOS3
DMO3
0x19
CR1-3
R/W
TxOFF3
TAOS3
TxClkINV3
TxLEV3
Reserved
0x1A
CR2-3
R/W
Reserved
Reserved
ALOSDIS3
DLOSDIS3
REQEN3
0x1B
CR3-3
R/W
SR/DR_3
LOSMUT3
RxOFF
RxClk3INV
Reserved
0x1C
CR4-3
R/W
Reserved
STS-1/DS3_Ch3
E3_CH3
LLB3
RLB3
0x1D
CR5-3
R/W
Reserved
Reserved
Reserved
Reserved
Reserved
0x1E
CR6-3
R/W
Reserved
Reserved
Reserved
Reserved
Reserved
0x1F
CR7-3
R/W
Reserved
Reserved
Reserved
Reserved
Reserved
T
ABLE
7: H
EXADECIMAL
A
DDRESSES
AND
B
IT
F
ORMATS
OF
XRT73L04 C
OMMAND
R
EGISTERS
R
EGISTER
B
IT
-F
ORMAT
ADDRESS
COMMAND
REGISTER
TYPE
D4
D3
D2
D1
D0
D4
D3
D2
D1
D0
RLOL
RLOS
ALOS
DLOS
DMO
1
1
1
1
1