參數資料
型號： MC68HC58FN
廠商： MOTOROLA INC
元件分類： 微控制器/微處理器
英文描述： 1 CHANNEL(S), LOCAL AREA NETWORK CONTROLLER, PQCC28
封裝： PLASTIC, LCC-28
文件頁數： 69/102頁
文件大小： 700K
代理商： MC68HC58FN
MC68HC58
CONTROL AND STATUS CODES
MOTOROLA
TECHNICAL DATA
5-3
If a frame is in progress on the J1850 bus (no EOD has been detected) when this com-
mand is latched, the DLC sends the IFR only if no receiver errors are detected. When
receiver errors are detected, the IFR is not transmitted, and is lost. If this occurs, the
DLC status byte indicates that the TxFIFO buffer is empty, and the DLC does not ter-
minate automatic retry.
If the DLC is transmitting when this command is latched, a timing error or an incom-
plete byte error will occur. The TxFIFO buffer is flushed, and both the frame and the
IFR are lost.
When additional IFR bytes are required, they must be placed in the TxFIFO buffer rap-
idly enough to prevent underrun. The second IFR byte must be loaded before the fall-
ing edge of the Normalization bit, and subsequent bytes must be loaded within 500
s
of each other. If a TxFIFO underrun occurs, it is flagged as an error, and the CRC byte
is complemented and appended to the IFR being transmitted.
5.1.1.5 Terminate Auto Retry
The “terminate auto retry” command disables automatic retry. A DLC will normally at-
tempt to retransmit a frame that loses arbitration unless it is sending an IFR or a block
mode transmission.
If this command is latched while a transmission is in progress, the DLC attempts to
complete the frame. After the frame is successfully transmitted, or after it loses arbi-
tration, automatic retry terminates and the TxFIFO buffer is flushed.
If this command is latched while a complete frame that has lost arbitration is in the
buffer awaiting retransmission, the DLC attempts to retransmit the frame once more.
After the frame is sent, automatic retry terminates and the TxFIFO buffer is flushed.
If this command is latched while a complete frame that has not been transmitted is in
the buffer awaiting transmission, the DLC attempts to send the frame once, then au-
tomatic retry terminates and the TxFIFO buffer is flushed.
5.1.1.6 Send IFR on EOD without CRC
The “send IFR on EOD without CRC” command causes a DLC to clear the transmitter
and TxFIFO buffer, terminate automatic frame retransmission, and originate an IFR
with no CRC. This command must accompany a data byte, and the command byte
BTAD field must indicate either “l(fā)oad as first byte of transmit data” or “l(fā)oad as first and
last byte of transmit data”. The subsequent bytes in the same IFR must not be accom-
panied by this command.
If this command is latched while the J1850 bus is idle, or between EOD and EOF, the
IFR is not transmitted, and is lost. When this occurs, the DLC status byte indicates that
the TxFIFO buffer is empty, and the DLC does not terminate automatic retry.
相關PDF資料
PDF描述
MC68HC58DW 1 CHANNEL(S), LOCAL AREA NETWORK CONTROLLER, PDSO28
MC68HC68T1P 1 TIMER(S), REAL TIME CLOCK, PDIP16
MC68HC705B16NVFNR2 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PQCC52
MC68HC705B16NCFNR2 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PQCC52
MC68HC705B16VFNR2 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PQCC52
相關代理商/技術參數
參數描述
MC68HC68T1P 制造商:Motorola Inc 功能描述:
MC68HC705B16CFN 制造商:Motorola Inc 功能描述:
MC68HC705B16FN 制造商:Rochester Electronics LLC 功能描述:
MC68HC705B16NB 制造商:Rochester Electronics LLC 功能描述:
MC68HC705B16NCB 制造商:Rochester Electronics LLC 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*