參數資料
型號： MT9076
廠商： Mitel Networks Corporation
英文描述： T1/E1/J1 3.3V Single Chip Transceiver(T1/E1/J1 3.3V 單片收發器)
中文描述： T1/E1/J1收發3.3V的單芯片收發器（T1/E1/J1收發3.3單片收發器）
文件頁數： 65/162頁
文件大?。?/td> 427K
代理商： MT9076
Preliminary Information
MT9076
61
Bit
Name
Functional Description
7
EDL
Enable Data Link
. Setting this bit multiplexes the serial stream clocked in on pin TxDL into
the FDL bit position (ESF mode) or the Fs position (D4 mode).
6
BIOMEn
Bit Oriented Messaging Enable
. Setting this bit enables transmission of bit - oriented
messages on the ESF facility data link. The actual message transmit at any one time is
contained in the BIOMTx register (page 1, address 13H). The receive bit - oriented message
register is always active, although the interrupt associated with it may be masked.
5
EXZ
Excess Zeros.
Setting this bit causes each occurance of received excess zeros to increment
the Line Code Violation Counter. Excess zeros are defined as 8 or more successive zeros for
B8ZS encoded data, or 16 or more successive zeros for non-B8ZS encoded data.
4
TxPDVS
Transmit Pulse Density Violation Screen.
Setting this bit causes ones to be injected into
the transmit data in the event that a violation of the ones density requirement is detected in
the outgoing data.
3
TxSYNC
Transmit Synchronization
. Setting this bit causes the transmit multiframe boundary to be
internally synchronized to the incoming Sbits on DSTi channel 31 bit 0.
2
TRSP
Transparent Mode
. Setting this bit causes unframed data to be transmit from DSTi channels
0 to 23 and channel 31 bit 7 to be transmit transparently onto the DS1 line. Unframed data
received from the DS1 line is piped out on DSTo channels 0 to 23 and channel 31 bit 0.
1
JTS
Japan Telecom Synchronization
. Setting this bit forces the inclusion of Sbits in the CRC-6
calculation.
0
H1R64
HDLC Rate Select
. Setting this pin high while an HDLC is activated on a timeslot enables 64
Kb/s operation. Setting this pin low while an HDLC is activated enables 56 Kb/s operation (this
prevents data corruption due to forced bit stuffing).
Table 23 - Data Link Control Word (T1)
(Page 1, Address 12H)
Bit
Name
Functional Description
7 - 0
BIOMTx7-0
Transmit Bit Oriented Message
. The contents of this register are concatenated with a
sequence of eight 1’s and continuously transmit in the FDL bit position of ESF trunks.
Normally the leading bit (bit 7) and last bit (bit 0) of this register are set to zero.
Table 24 - Transmit Bit Oriented Message (T1)
(Page 1, Address 13H)
相關PDF資料
PDF描述
MT9079 Advanced Controller for E1(先進的E1幀調節器和控制器)
MT9080B SMX - Switch Matrix Module(用于消費類轉換應用的開關矩陣模塊)
MT90810 Flexible MVIP(Multi-Vendor Integration Protocol) Interface Circuit(彈性MVIP接口電路)
MT90812 Integrated Digital Switch (IDX)(集成數字開關)
MT90840AK Distributed Hyperchannel Switch
相關代理商/技術參數
參數描述
MT9076AB 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:T1/E1/J1 3.3V Single Chip Transceiver
MT9076AP 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:T1/E1/J1 3.3V Single Chip Transceiver
MT9076B 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:T1/E1/J1 3.3 V Single Chip Transceiver
MT9076BB 制造商:Zarlink Semiconductor Inc 功能描述:FRAMER E1/J1/T1 3.3V 80LQFP - Trays
MT9076BB1 制造商:Zarlink Semiconductor Inc 功能描述:FRAMER E1/J1/T1 3.3V 80LQFP - Trays
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*