參數資料
型號： TVP3010-85
廠商： Texas Instruments, Inc.
英文描述： Hardware Cursor, GAMMA Correction VIP(85MHz,高/寬光標，伽馬校正，視頻接口調色板)
中文描述： 硬件光標，伽瑪校正貴賓（85MHz，高/寬光標，伽馬校正，視頻接口調色板）
文件頁數： 28/100頁
文件大小： 571K
代理商： TVP3010-85
2–14
2.4.5
In true-color mode, the palette RAM is partitioned into three independent 256-word
×
8-bit memory blocks
that can be individually addressed by each color field of the true-color data. The independent memory blocks
provide data for a single DAC output. With this architecture, gamma correction for each color is possible.
Since the palette is used in true-color mode, there is no memory space to be used for the overlay function.
All of the true-color submodes are the same as direct color except that overlay is not available. See Tables
2–6 through 2–11 for more details on mode selection. See note below.
True-Color Mode
NOTE:
Since less than 8 bits are defined for each color in the various 12- or 16-bit direct-
or true-color modes, the data bits for the individual colors are internally shifted to
the MSB locations and the remaining LSB locations for each color are set to logic 0
before 8-bit data is sent to the DACs.
Since the overlay information goes through the pseudo-color data path, it is subject
to read masking and the palette-page register. This is especially important for those
direct-color modes that have less than eight bits of overlay information. The overlay
information in these modes justifies to the LSB bit positions, and the remaining
MSB positions are filled with the corresponding palette-page data before
addressing the palette RAM.
In order to display true color (gamma corrected through the palette), either the
auxiliary windowing or the color-key switching function must be set for palette
graphics. For direct color, both functions must be set for direct color.
In order to use the overlay capability of the direct-color modes, the color-key
switching or port-select function must be configured and enabled. Overlay port data
in a window is also available by enabling the auxiliary window function. If either the
auxiliary windowing or the color-key switching functions point to palette graphics,
palette graphics are always displayed (not direct color).
When in the 24-bit direct-color or true-color modes, the data input works only in the
8-bit mode. In other words, if only six bits are used, the two LSB inputs for each color
need to be tied to GND. However, the palette, which is used by the overlay input,
is still governed by 8/6, and the output multiplexer selects 8 bits or 6 bits of data
accordingly. The 8/6 is also valid in the other 16-bit modes.
The definitions of direct color (palette bypass) and true color are consistent with the
IBM XGA terminology.
相關PDF資料
PDF描述
TVP3010C Video Interface Palette
TVP3010M Video Interface Palette
TVP3020-175 Video Interface PALETTE(視頻接口調色器)
TVP3020-135 Video Interface PALETTE(視頻接口調色器)
TVP3025-135 Video Interface PALETTE(三PLL，視頻接口調色器)
相關代理商/技術參數
參數描述
TVP3010-85FN 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Video DAC with Color Palette (RAMDAC)
TVP3010-85FNR 制造商:TI 制造商全稱:Texas Instruments 功能描述:Video Interface Palette
TVP3010C 制造商:TI 制造商全稱:Texas Instruments 功能描述:Video Interface Palette
TVP3010M 制造商:TI 制造商全稱:Texas Instruments 功能描述:Video Interface Palette
TVP3020 制造商:TI 制造商全稱:Texas Instruments 功能描述:Video Interface Palette
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*