MPC5606S Microcontroller Data Sheet, Rev. 7
Freescale Semiconductor
54
3
Electrical characteristics
3.1
Introduction
This section contains electrical characteristics of the device as well as temperature and power considerations.
This product contains devices to protect the inputs against damage due to high static voltages. However, it is advisable to take
precautions to avoid application of any voltage higher than the specified maximum rated voltages.
To enhance reliability, unused inputs can be driven to an appropriate logic voltage level (VDD or VSS). This could be done by
internal pull up and pull down, which is provided by the product for most general purpose pins.
The parameters listed in the following tables represent the characteristics of the device and its demands on the system.
In the tables where the device logic provides signals with their respective timing characteristics, the symbol “CC” for Controller
Characteristics is included in the Symbol column.
In the tables where the external system must provide signals with their respective timing characteristics to the device, the symbol
“SR” for System Requirement is included in the Symbol column.
3.2
Parameter classification
The electrical parameters shown in this supplement are guaranteed by various methods. To give the customer a better
understanding, the classifications listed in
Table 11 are used and the parameters are tagged accordingly in the tables where
appropriate.
RXD_1
LINFlex
SCI/LIN Receive data signal. Input pad for the LIN SCI module.
Connects to the internal LIN second port.
TXD_0
LINFlex
SCI/LIN Transmit data signal. This port is used to download the code
for the BAM boot sequence.
TXD_1
LINFlex
SCI/LIN Transmit data signal—Transmit (output) port for the second
LIN module in the chip
SOUND
SGL
Sound signal to the speaker/buzzer
SSD[0:5]_0
SSD[0:5]_1
SSD[0:5]_2
SSD[0:5]_3
SSD
Bidirectional control of stepper motors using stall detection module
M[0:5]C0M
M[0:5]C0P
M[0:5]C1M
M[0:5]C1P
SMC
Controls stepper motors in various configuration
CLKOUT
MC_CGM
Output clock—It can be selected from several internal clocks of the
device from the clock generation module.
Table 10. Signal details (continued)
Signal
Peripheral
Description