參數資料
型號： MT90812
廠商： Mitel Networks Corporation
英文描述： Integrated Digital Switch (IDX)(集成數字開關)
中文描述： 綜合數字交換機（IDX的）（集成數字開關）
文件頁數： 65/105頁
文件大小： 334K
代理商： MT90812
Advance Information
MT90812
61
22.11
Tone Generation and Energy Detect Control Register (TEDC)
The Tone Generation and Energy Detect register controls the two tone ringers and both A and B energy detect
modules.
The
TEDC
register is configured as follows:
Of the 7 programmable tone generators the first two can be used to provide dual frequency squarewave ringing
signal. TRE1/WR1 and TRE2/WR2 are used to control Tone Ringer generator 1 and 2, respectively. Refer to
Tone Ringer description on page 44.
Each energy detect module monitors the signal for the selected incoming channel. Locations 71
H
and 72
H
of
CM are used to specify the incoming channel for EDA and EDB, respectively. An interrupt is generated and the
energy detect flag is set when the signal exceeds the threshold set in the Energy Detect A/B Low/High
Threshold register. A reset is performed by resetting the EDENA/B bit. During a reset the peak detector value
and energy detect flag are set to zero.
The Tone Generation circuit can be enabled with TGE bit set to 1. With the circuit reset there is no output
generated for all the 32 tones including the Tone Ringers and FSK transmitter output.
Read/Write Address is: 010
H
Reset Value is: 00
H
Bit
Name
Description
7
unused
6
TGE
0 = Reset for Tone Generation Circuit
.
1 = Enables Tone Generation
. Tone
Generation must be enabled for FSK transmission and Tone Ringer operation.
5
TRE2
Tone Ringer Enable bit
. For Programmable Tone Generator 2.
1 = The tone ringer generator is enabled using the coefficients for programmable
tone generator 2 as well as the WR2 control bit.
0 = The tone ringer generator 2 is disabled. With Tone Ringer 2 disabled the 2nd
programmable Coefficients are used to generate DTMF signalling instead of the
squarewave ringing tone.
4
WR2
Warble Rate bit
. For Programmable Tone Generator 2.
1 = The tone ringer circuit will toggle between the two programmed frequencies at a
5 Hz rate.
0 = The tone ringer warble rate is 10 Hz.
3
TRE1
Tone Ringer Enable bit
. For Programmable Tone Generator 1.
2
WR1
Warble Rate bit
. For Programmable Tone Generator 1.
1
EDENB
1 = Enable for Energy Detect B circuit
.
0
EDENA
1 = Enable for Energy Detect A circuit
.
7
6
5
4
3
2
1
0
ERA
ERB
TRE2
WR2
TRE1
WR1
TGE
相關PDF資料
PDF描述
MT90840AK Distributed Hyperchannel Switch
MT90840AP Distributed Hyperchannel Switch
MT9085B PAC - Parallel Access Circuit(并行存取電路)
MT9092 Digital Telephone with HDLC(數字電話（帶高階數據鏈路控制HDLC）)
MT9092 ISO2-CMOS ST-BUS⑩ FAMILY Digital Telephone with HDLC (HPhone-II)
相關代理商/技術參數
參數描述
MT90812AL 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 64MQFP - Trays 制造商:Zarlink Semiconductor Inc 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 64MQFP - Trays
MT90812AL1 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 64MQFP - Trays 制造商:Microsemi Corporation 功能描述:PB FREE INTEGRATED DIGITAL SWITCH
MT90812AP 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:Integrated Digital Switch (IDX)
MT90812AP1 制造商:Zarlink Semiconductor Inc 功能描述:SWIT FABRIC 192 X 192 16.384MBPS 5V 68PLCC /BAKE/DRYPACK - Rail/Tube 制造商:Zarlink Semiconductor Inc 功能描述:INTEGRATED DIGITAL SWCH
MT90812APR 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 192 X 192/64 X 64 1.048GBPS 5V 68PLCC - Tape and Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*