參數資料
型號： pentium III CPU
廠商： Intel Corp.
英文描述： Pentium III Processor for the SC242 at 450MHz to 1.0GHz(SC242工作頻率450MHZ到1GHZ奔III處理器)
中文描述： 奔騰III處理器在450MHz至1.0GHz的（SC242工作頻率至450MHz到1GHz的奔三處理器的SC242）
文件頁數： 40/102頁
文件大?。?/td> 920K
代理商： PENTIUM III CPU
40
Datasheet
Pentium
III Processor for the SC242 at 450 MHz to 1.0 GHz
3.2
AGTL+ and Non-AGTL+ Overshoot/Undershoot
Specifications and Measurement Guidelines
Overshoot/Undershoot is the absolute value of the maximum voltage differential across the input
buffer relative termination voltage (V
TT
). The overshoot/undershoot guideline limits transitions
beyond V
TT
or V
SS
due to the fast signal edge rates. The processor can be damaged by repeated
overshoot/undershoot events on 1.5 V or 2.5 V tolerant buffers if the charge is large enough (i.e., if
the overshoot/undershoot is great enough). Determining the impact of an overshoot/undershoot
condition requires knowledge of the Magnitude, the Pulse Duration, and the Activity Factor.
When performing simulations to determine impact of overshoot/undershoot, ESD diodes must be
properly characterized. ESD protection diodes do not act as voltage clamps and will not provide
overshoot/undershoot protection. ESD diodes modeled within the Intel provided
Pentium
III
Processor I/O Buffer Models
do not clamp overshoot/undershoot and will yield correct simulation
results. If other I/O buffer models are being used to characterize Pentium
III
processor
performance, care must be taken to ensure that ESD models do not clamp extreme voltage levels.
The Intel-provided
Pentium
III
Processor I/O Buffer Models
also contains I/O capacitance
characterization. Therefore, removing the ESD diodes from the I/O buffer model will impact
results and may yield excessive overshoot/undershoot.
3.2.1
Overshoot/Undershoot Magnitude
Overshoot/Undershoot Magnitude describes the maximum potential difference between a signal
and its voltage reference level, V
SS
(overshoot) and V
TT
(undershoot). While overshoot can be
measured relative to V
SS
using one probe (probe to signal - GND lead to V
SS
), undershoot must be
measured relative to V
TT
. This could be accomplished by simultaneously measuring the V
TT
plane
while measuring the signal undershoot. The true waveform can then be calculated by the
oscilloscope itself or by the following oscilloscope date file analysis:
Converted Undershoot Waveform = V
TT
- Signal_measured
Note:
The Converted Undershoot Waveform appears as a positive (overshoot) signal.
Note:
Overshoot (rising edge) and undershoot (falling edge) conditions are separate and their impact
must be determined independently.
After the conversion, the Undershoot/Overshoot Specifications (
Table 20
through
Table 22
) can be
applied to the Converted Undershoot Waveform using the same Magnitude and Pulse Duration
Specifications (
Table 20
through
Table 22
) as with an overshoot waveform.
Overshoot/undershoot magnitude levels must observe the Absolute Maximum Specifications
(
Table 20
through
Table 22
). These specifications must not be violated at any time regardless of
bus activity or system state. Within these specifications are threshold levels that define different
allowed Pulse Durations. Provided that the magnitude of the overshoot/undershoot is within the
Absolute Maximum Specifications, the impact of the Overshoot/Undershoot Magnitude may be
determined based upon the Pulse Duration and Activity Factor.
相關PDF資料
PDF描述
pentium III processor 32 bit Processor Mobile Module(32 位帶移動模塊處理器)
Pentium OverDrive Processor Pentium OverDrive Processor With MMX Technology For Pentium Processor-Based System(帶MMX技術奔騰超速轉動處理器)
pentium pro processor Pentium Pro Processor with 1MB L2 Cache at 200MHZ(1兆比特L2高速緩存頻率200兆赫茲處理器)
pentium processor with MMX 32-bit processor with MMX technology(32位帶MMX技術處理器)
pentium processor 32 Bit Processor With MMX And Mobile Module(32位帶移動模塊和MMX技術CPU)
相關代理商/技術參數
參數描述
P-ENV568K3G3 制造商:Panasonic Industrial Company 功能描述:TUNER
PEO14012 制造商:TE Connectivity 功能描述:RELAY SPCO 12VDC
PEO14024 制造商:TE Connectivity 功能描述:RELAY SPCO 24VDC
PEO96742 制造商:Delphi Corporation 功能描述:ASM TERM
PEOODO3A 制造商:MACOM 制造商全稱:Tyco Electronics 功能描述:Versatile Power Entry Module with Small Footprint
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*