![](http://datasheet.mmic.net.cn/330000/PM8315_datasheet_16444435/PM8315_101.png)
STANDARD PRODUCT
PM8315 TEMUX
DATASHEET
PMC-1981125
ISSUE 7
HIGH DENSITY T1/E1 FRAMER WITH
INTEGRATED VT/TU MAPPER AND M13 MUX
PROPRIETARY AND CONFIDENTIAL
86
9.18 Receive and Transmit Digital Jitter Attenuator (RJAT, TJAT)
The Digital Jitter Attenuation function is provided by the DJAT blocks. Each
framer in the TEMUX contains two separate jitter attenuators, one between the
receive demultiplexed or demapped T1 or E1 link and the ingress interface
(RJAT) and the other between the egress interface and the transmit T1 or E1 link
to be multiplexed into DS3 or mapped into SONET (TJAT). Each DJAT block
receives jittered data and stores the stream in a FIFO timed to the associated
receive jittered clock. The jitter attenuated data emerges from the FIFO timed to
the jitter attenuated clock. In the RJAT, the jitter attenuated clock (ICLK[x]) is
referenced to the demultiplexed or demapped tributary receive clock. In the
TJAT, the jitter attenuated transmit tributary clock feeding the M13 multiplexer or
SONET/SDH mapper may be referenced to either CTCLK, CECLK, or the
tributary receive clock.
In T1 mode each jitter attenuator generates its output clock by adaptively dividing
the 37.056 MHz XCLK signal according to the phase difference between the jitter
attenuated clock and the input reference clock. Jitter fluctuations in the phase of
the reference clock are attenuated by the phase-locked loop within each DJAT
so that the frequency of the jitter attenuated clock is equal to the average
frequency of the reference. To best fit the jitter attenuation transfer function
recommended by TR 62411, phase fluctuations with a jitter frequency above 6.6
Hz are attenuated by 6 dB per octave of jitter frequency. Wandering phase
fluctuations with frequencies below 6.6 Hz are tracked by the jitter attenuated
clock. The jitter attenuated clock (ICLK[x] for the RJAT and transmit clock for the
TJAT) are used to read data out of the FIFO.
In E1 mode each jitter attenuator generates the jitter-free 2.048 MHz output
clock by adaptively dividing the 49.152 MHz XCLK signal according to the phase
difference between the jitter attenuated clock and input reference clock.
Fluctuations in the phase of the input data clock are attenuated by the phase-
locked loop within DJAT so that the frequency of the jitter attenuated clock is
equal to the average frequency of the input data clock. Phase fluctuations with a
jitter frequency above 8.8 Hz are attenuated by 6 dB per octave of jitter
frequency. Wandering phase fluctuations with frequencies below 8.8 Hz are
tracked by the jitter attenuated clock. To provide a smooth flow of data out of
DJAT, the jitter attenuated clock is used to read data out of the FIFO.
The TJAT and RJAT have programmable divisors in order to generate the jitter
attenuated clock from the various reference sources. The divisors are set using
the TJAT and RJAT Jitter Attenuator Divider N1 and N2 registers. The following
formula must be met in order to select the values of N1 and N2:
Fin/(N1 + 1) = Fout/(N2 + 1)