Error insertion can be initiated by a register bit (PLCP.TEIR.TSEI) or initiated by the manual error insertion " />
參數資料
型號: DS3184N+
廠商: Maxim Integrated Products
文件頁數: 62/400頁
文件大?。?/td> 0K
描述: IC PACKET PHY W/LIU 400-CSBGA
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 40
類型: 調幀器
應用: 數據傳輸
安裝類型: 表面貼裝
封裝/外殼: 400-BBGA
供應商設備封裝: 400-PBGA(27x27)
包裝: 管件
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁當前第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁第155頁第156頁第157頁第158頁第159頁第160頁第161頁第162頁第163頁第164頁第165頁第166頁第167頁第168頁第169頁第170頁第171頁第172頁第173頁第174頁第175頁第176頁第177頁第178頁第179頁第180頁第181頁第182頁第183頁第184頁第185頁第186頁第187頁第188頁第189頁第190頁第191頁第192頁第193頁第194頁第195頁第196頁第197頁第198頁第199頁第200頁第201頁第202頁第203頁第204頁第205頁第206頁第207頁第208頁第209頁第210頁第211頁第212頁第213頁第214頁第215頁第216頁第217頁第218頁第219頁第220頁第221頁第222頁第223頁第224頁第225頁第226頁第227頁第228頁第229頁第230頁第231頁第232頁第233頁第234頁第235頁第236頁第237頁第238頁第239頁第240頁第241頁第242頁第243頁第244頁第245頁第246頁第247頁第248頁第249頁第250頁第251頁第252頁第253頁第254頁第255頁第256頁第257頁第258頁第259頁第260頁第261頁第262頁第263頁第264頁第265頁第266頁第267頁第268頁第269頁第270頁第271頁第272頁第273頁第274頁第275頁第276頁第277頁第278頁第279頁第280頁第281頁第282頁第283頁第284頁第285頁第286頁第287頁第288頁第289頁第290頁第291頁第292頁第293頁第294頁第295頁第296頁第297頁第298頁第299頁第300頁第301頁第302頁第303頁第304頁第305頁第306頁第307頁第308頁第309頁第310頁第311頁第312頁第313頁第314頁第315頁第316頁第317頁第318頁第319頁第320頁第321頁第322頁第323頁第324頁第325頁第326頁第327頁第328頁第329頁第330頁第331頁第332頁第333頁第334頁第335頁第336頁第337頁第338頁第339頁第340頁第341頁第342頁第343頁第344頁第345頁第346頁第347頁第348頁第349頁第350頁第351頁第352頁第353頁第354頁第355頁第356頁第357頁第358頁第359頁第360頁第361頁第362頁第363頁第364頁第365頁第366頁第367頁第368頁第369頁第370頁第371頁第372頁第373頁第374頁第375頁第376頁第377頁第378頁第379頁第380頁第381頁第382頁第383頁第384頁第385頁第386頁第387頁第388頁第389頁第390頁第391頁第392頁第393頁第394頁第395頁第396頁第397頁第398頁第399頁第400頁
DS3181/DS3182/DS3183/DS3184
154
Error insertion can be initiated by a register bit (PLCP.TEIR.TSEI) or initiated by the manual error insertion input
(TMEI). Each error type is individually enabled by a register bit. The error insertion initiation type (register or input)
is programmable. Once all error insertion has been performed, the data stream is passed on to overhead insertion.
10.8.5.4 Transmit DS3 PLCP Overhead Insertion
Overhead insertion can insert any (or all) of the path overhead bytes into the DS3 PLCP frame. The overhead
bytes Z6 – Z1, F1, B1, G1, M1, M2, and C1 can be sourced from the transmit overhead interface (TPOHCLK,
TPOH, TPOHEN, and TPOHSOF). The B1 and C1 bytes are sourced as error masks (modulo 2 addition of the
input B1/C1 byte and the generated B1/C1 byte). The overhead insertion is fully controlled by the transmit
overhead interface. If the transmit PLCP overhead data enable signal (TPOHEN) is driven high, then the bit on the
transmit PLCP overhead signal (TPOH) is inserted into the output data stream. Insertion of bits using the TPOH
signal overwrites internal overhead insertion.
10.8.6 Receive DS3 PLCP Frame Processor
The DS3 PLCP frame format is shown in Figure 10-32. A1 and A2 are the sub-frame Alignment bytes that have a
value of F6h and 28h respectively. P11 – P0 are the Path Overhead Identifier (POI) bytes that indicate the path
overhead byte contained in the current sub-frame. Z6 – Z1 are growth bytes reserved for future use. F1 is the Path
User Channel byte allocated for user communications purposes (This byte is undefined in ATM). B1 is the Bit
Interleaved Parity-8 (BIP-8) byte used for PLCP path error monitoring. G1 is the PLCP Path Status Byte (See
Figure 10-33) used for far-end path status and performance monitoring (bits 6 – 8 are undefined in ATM). M1 and
M2 are the DQDB Layer Management Information bytes used for DQDB layer management communications
(These bytes are undefined in ATM). C1 is the Cycle/Stuff Counter byte used as for PLCP superframe alignment
and stuff indication.
10.8.6.1 Receive DS3 PLCP Framing
DS3 PLCP framing determines the DS3 PLCP frame boundary. The frame boundary is found by identifying the
frame alignment bytes (A1 & A2), and the path overhead indicator (POI) byte (P#). The framer is an off-line framer
that updates the data path frame counters when an out of frame (OOF) condition is present. The use of an off-line
framer reduces the number of ATM cells discarded during the framing process. The framer continually searches for
two consecutive sets of alignment bytes (A1 and A2), and two sequential POI bytes (P#) are identified. The data
path frame counters are updated if an OOF condition is present. The maximum average reframe time is 17
s.
10.8.6.2 Receive DS3 PLCP Nibble Destuffing
Nibble destuffing discards the DS3 PLCP frame trailer immediately following sub-frame 0 (POI equals 01h). The
trailer size is determined by the DS3 PLCP superframe counter, and the cycle counter byte (C1). The trailer is 13
nibbles in the first frame of the superframe (C1 equals FFh). The trailer is 14 nibbles in the second frame of the
superframe (C1 equals 00h). The trailer length is variable in the third frame of the superframe. It is 14 nibbles if C1
equals 66h and 14 nibbles if C1 equals 99h. The superframe counter is updated immediately upon receiving an
error free C1. In the third superframe, majority voting (5 of 8) is used to determine the trailer size. Once the trailer
size has been determined, the trailer nibbles are discarded.
10.8.6.3 Receive DS3 PLCP Performance Monitoring
Performance monitoring checks the DS3 PLCP frame for errors and alarm conditions. The alarm conditions
detected are OOF, LOF, COFA, and RAI. All alarm conditions are defect conditions. The PLCP Framer does not
integrate alarms for failure conditions.
An Out Of Frame (OOF) condition is declared when two consecutive framing bytes (A1 and A2) or two consecutive
POI bytes (P0 - P11) are erred. An OOF condition is terminated when two sequential POI bytes and two
consecutive framing words (A1 and A2) are error free or the DS3 PLCP framer updates the data path frame
counters.
If the Loss Of Frame (LOF) integration counter is disabled, an LOF condition is declared when an OOF condition
has been continuously present for 1 ms. If the LOF integration counter is enabled, an LOF condition is declared by
the LOF integration counter when the counter has been active for a total of 1 ms. The LOF integration counter is
active (increments count) when an OOF condition is present, it is inactive (holds count) when an OOF condition is
absent, and it is reset when an OOF condition is continuously absent for 1 ms. An LOF condition is terminated
when an OOF condition is continuously absent for 1 ms.
相關PDF資料
PDF描述
DS3184+ IC PACKET PHY W/LIU 400-CSBGA
MAX4507CWN IC SIGNAL LINE PROTECTOR 18-SOIC
MAX4507CAP IC SIGNAL LINE PROTECTOR 20-SSOP
LFXP20C-4F484I IC FPGA 19.7KLUTS 340I/O 484-BGA
MAX4505EUK-T IC SIGNAL LINE PROTECTOR SOT23-5
相關代理商/技術參數
參數描述
DS3184N+ 功能描述:網絡控制器與處理器 IC Quad ATM/Packet PHYs w/Built-In LIU RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS318PIN 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC
DS-318PIN 制造商:MA-COM 制造商全稱:M/A-COM Technology Solutions, Inc. 功能描述:Plug-In Two-Way Power Divider, 5 - 500 MHz
DS-318-PIN 功能描述:信號調節 RoHS:否 制造商:EPCOS 產品:Duplexers 頻率:782 MHz, 751 MHz 頻率范圍: 電壓額定值: 帶寬: 阻抗:50 Ohms 端接類型:SMD/SMT 封裝 / 箱體:2.5 mm x 2 mm 工作溫度范圍:- 30 C to + 85 C 封裝:Reel
DS319 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Two-Way Power Divider 10500 MHz