參數資料
型號: PI7C8150BMAE
廠商: Pericom
文件頁數: 74/109頁
文件大?。?/td> 0K
描述: IC PCI-PCI BRIDGE ASYNC 208-FQFP
標準包裝: 24
系列: *
應用: *
接口: *
電源電壓: *
封裝/外殼: 208-BFQFP
供應商設備封裝: 208-FQFP(28x28)
包裝: 管件
安裝類型: 表面貼裝
產品目錄頁面: 1227 (CN2011-ZH PDF)
PI7C8150B
ASYNCHRONOUS 2-PORT PCI-TO-PCI BRIDGE
ADVANCE INFORMATION
Page 67 of 109
April 2009 – Revision 1.08
If the internal secondary bus arbiter is enabled, the secondary bus is always parked at the
last master that used the PCI bus. That is, PI7C8150B keeps the secondary bus grant
asserted to a particular master until a new secondary bus request comes along. After reset,
PI7C8150B parks the secondary bus at itself until transactions start occurring on the
secondary bus. Offset 48h, bit 1, can be set to 1 to park the secondary bus at PI7C8150B.
By default, offset 48h, bit 1, is set to 0. If the internal arbiter is disabled, PI7C8150B parks
the secondary bus only when the reconfigured grant signal, S_REQ_L[0], is asserted and
the secondary bus is idle.
9
CLOCKS
This chapter provides information about the clocks.
9.1
PRIMARY CLOCK INPUTS
PI7C8150B implements a primary clock input for the PCI interface. The primary interface
is synchronized to the primary clock input, P_CLK, and the secondary interface is
synchronized to the secondary clock. In synchronous mode, the secondary clock is derived
internally from the primary clock, P_CLK. PI7C8150B operates at a maximum frequency
of 66 MHz (33MHz for PI7C8150B-33).
9.2
SECONDARY CLOCK OUTPUTS
PI7C8150B has 10 secondary clock outputs, S_CLKOUT[9:0] that can be used as clock
inputs for up to nine external secondary bus devices. In synchronous mode, the
S_CLKOUT[9:0] outputs are derived from P_CLK. The secondary clock edges are delayed
from P_CLK edges by a minimum of 0ns. This is the rule for using secondary clocks:
Each secondary clock output is limited to no more than one load.
9.3
ASYNCHRONOUS MODE
In asynchronous mode, the PI7C8150B can be run in the following frequency
configuration:
Primary (MHz)
Secondary (MHz)
25MHz to 66MHz
PI7C8150B-33 can be run in the following frequency configuration:
Primary (MHz)
Secondary (MHz)
25MHz to 33MHz
相關PDF資料
PDF描述
D38999/26FD15PA CONN PLUG 15POS STRAIGHT W/PINS
D38999/20MC8SN CONN RCPT 8POS WALL MNT W/SCKT
D38999/20MD18SN CONN RCPT 18POS WALL MNT W/SCKT
0510210700 CONN HOUSING 7POS 1.25MM
ADN8102ACPZ IC EQUALIZER 4CH XSTREAM 64LFCSP
相關代理商/技術參數
參數描述
PI7C8150BMAI 制造商:PERICOM 制造商全稱:Pericom Semiconductor Corporation 功能描述:ASYNCHRONOUS 2-PORT PCI-TO-PCI BRIDGE
PI7C8150BMAI-33 制造商:PERICOM 制造商全稱:Pericom Semiconductor Corporation 功能描述:ASYNCHRONOUS 2-PORT PCI-TO-PCI BRIDGE
PI7C8150BMAIE 功能描述:外圍驅動器與原件 - PCI 2 Port 32B PCI Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
PI7C8150BMAIE-33 功能描述:外圍驅動器與原件 - PCI 2 Port 32B PCI Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
PI7C8150BND 功能描述:外圍驅動器與原件 - PCI 2-Port 32-Bit PCI Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray