![](http://datasheet.mmic.net.cn/330000/PM8315_datasheet_16444435/PM8315_17.png)
STANDARD PRODUCT
PM8315 TEMUX
DATASHEET
PMC-1981125
ISSUE 7
HIGH DENSITY T1/E1 FRAMER WITH
INTEGRATED VT/TU MAPPER AND M13 MUX
PROPRIETARY AND CONFIDENTIAL
2
Up to 28 VT1.5/TU11 or 21 VT2/TU12 tributaries can be passed between the
line SONET/SDH bus and the SBI bus as transparent virtual tributaries with
pointer processing.
When adding and dropping T1 or E1 tributaries the mapper and demapper
blocks allow for up to 28 VT1.5/TU11 or 21 VT2/TU12 tributaries to be
processed from any tributary location within the full STS-3/STM-1. On the
telecom DROP bus side this requires that the STS-3/STM-1 be in locked
mode such that the J1 bytes immediately follow the C1 bytes.
Supports transfer of PCM data to/from 1.544MHz and 2.048MHz serial
interface system-side devices. Also supports a fractional T1 or E1 system
interface with independent ingress/egress Nx64Kb/s rates. Supports a 2.048
MHz system-side interface for T1 mode without external clock gapping.
Supports 8Mb/s H-MVIP on the system interface for all T1 or E1 links, a
separate 8Mb/s H-MVIP system interface for all T1 or E1 CAS channels and
a separate 8Mb/s H-MVIP system interface for all T1 or E1 CCS and
V5.1/V5.2 channels.
Supports a byte serial Scaleable Bandwidth Interconnect (SBI) bus interface
for high density system side device interconnection of up to 84 T1 streams,
63 E1 streams or 3 DS3 streams. This interface also supports transparent
virtual tributaries when used with the SONET/SDH mapper.
Provides jitter attenuation in the T1 or E1 receive and transmit directions.
Provides two independent de-jittered T1 or E1 recovered clocks for system
timing and redundancy.
Provides per-DS0 line loopback and per link diagnostic and line loopbacks.
Provides an on-board programmable binary sequence generator and detector
for error testing at DS3 rates. Includes support for patterns recommended in
ITU-T O.151.
Also provides PRBS generators and detectors on each tributary for error
testing at DS1, E1 and NxDS0 rates as recommended in ITU-T O.151 and
O.152.
Provides robbed bit signaling extraction and insertion on a per-DS0 basis.
Provides programmable idle code substitution, data and sign inversion, and
digital milliwatt code insertion on a per-DS0 basis.