參數資料
型號： XRT83SL30IV-F
廠商： Exar Corporation
文件頁數： 18/76頁
文件大小： 0K
描述： IC LIU T1/E1/J1 SGL 64TQFP
標準包裝： 160
類型： 線路接口裝置（LIU）
驅動器/接收器數： 1/1
規程： T1，E1，J1
電源電壓： 3.135 V ~ 3.465 V
安裝類型： 表面貼裝
封裝/外殼： 64-LQFP
供應商設備封裝： 64-TQFP（10x10）
包裝： 托盤
XRT83SL30
22
REV. 1.0.1
SINGLE-CHANNEL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
ARBITRARY PULSE GENERATOR
In T1 mode only, the arbitrary pulse generator divides the pulse into eight individual segments. Each segment
is set by a 7-Bit binary word by programming the appropriate register. This allows the system designer to set
the overshoot, amplitude, and undershoot for a unique line build out. The MSB (bit 7) is a sign-bit. If the sign-bit
is set to “1”, the segment will move in a positive direction relative to a flat line (zero) condition. If this sign-bit is
set to “0”, the segment will move in a negative direction relative to a flat line condition. A pulse with numbered
segments is shown in Figure 9.
NOTE: By default, the arbitrary segments are programmed to 0x00h. The transmitter output will result in an all zero pattern
to the line.
TRANSMITTER
DIGITAL DATA FORMAT
Both the transmitter and receiver can be configured to operate in dual or single-rail data formats. This feature is
available under both Hardware and Host control modes. The dual or single-rail data format is determined by
the state of the SR/DR pin in Hardware mode or SR/DR interface bit in the Host mode. In single-rail mode,
transmit clock and NRZ data are applied to TCLK and TPOS/TDATA pins respectively. In single-rail and
Hardware mode the TNEG/CODE input can be used as the CODES function. With TNEG/CODE tied “Low”,
HDB3 or B8ZS encoding and decoding are enabled for E1 and T1 modes respectively. With TNEG/CODE tied
“High”, the AMI coding scheme is selected. In both dual or single-rail modes of operations, the transmitter
converts digital input data to a bipolar format before being transmitted to the line.
TRANSMIT CLOCK (TCLK) SAMPLING EDGE
Serial transmit data at TPOS/TDATA and TNEG/CODE are clocked into the XRT83SL30 under the
synchronization of TCLK. With a “0” written to the TCLKE interface bit, or by pulling the TCLKE pin “Low”, input
data is sampled on the falling edge of TCLK. The sampling edge is inverted with a “1” written to TCLKE
interface bit, or by connecting the TCLKE pin “High”.
FIGURE 9. ARBITRARY PULSE SEGMENT ASSIGNMENT
1
2
3
4
5
6
7
8
Segment
Register
1
0xn8
2
0xn9
3
0xna
4
0xnb
5
0xnc
6
0xnd
7
0xne
8
0xnf
相關PDF資料
PDF描述
XRT83SL314IB-L IC LIU SH T1/E1/J1 14CH 304TBGA
XRT83SL34IV-F IC LIU T1/E1/J1 QUAD 128TQFP
XRT83SL38IB-F IC LIU SH T1/E1/J1 OCTAL 225BGA
XRT83VL38IB-F IC LIU SH T1/E1/J1 OCTAL 225BGA
XRT83VSH28IB IC LIU SH E1 OCTAL 225BGA
相關代理商/技術參數
參數描述
XRT83SL30IVTR-F 功能描述:外圍驅動器與原件 - PCI RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT83SL314 制造商:EXAR 制造商全稱:EXAR 功能描述:14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT
XRT83SL314_05 制造商:EXAR 制造商全稱:EXAR 功能描述:14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT
XRT83SL314ES 功能描述:LIN 收發器 14 CHT1/E1 LIUSH RoHS:否 制造商:NXP Semiconductors 工作電源電壓: 電源電流: 最大工作溫度: 封裝 / 箱體:SO-8
XRT83SL314IB 功能描述:外圍驅動器與原件 - PCI RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*