參數資料
型號: XRT91L80IB-F
廠商: Exar Corporation
文件頁數: 2/46頁
文件大小: 0K
描述: IC TXRX SONET/SDH 4BIT 196STBGA
產品變化通告: XRT91L80IB Obsolescence 6/Sept/2010
標準包裝: 126
類型: 收發器
規程: SONET/SDH
電源電壓: 3.3V
安裝類型: 表面貼裝
封裝/外殼: 196-LFBGA
供應商設備封裝: 196-STBGA(12x12)
包裝: 托盤
XRT91L80
xr
2.488/2.666 GBPS STS-48/STM-16 SONET/SDH TRANSCEIVER
REV. 1.0.0
8
TXCLKO16P
TXCLKO16N
LVDS
O
N10
N11
Auxiliary Clock Output (155.52/166.63 MHz)
155.52/166.63 MHz auxiliary clock derived from CMU output.
This clock can also be used for the downstream device as a ref-
erence for generating the TXDI[3:0]P/N data and TXPCLKIP/N
clock input. This enables the downstream device and the STS-
48/STM-16 transceiver to be in synchronization. The output of
this pin is controlled by TXCLKO16DIS.
TXCLKO16DIS
LVTTL,
LVCMOS
I
M12
Auxiliary Clock Disable
This pin is used to control the activity of the auxiliary clock.
"Low" = TXCLKO16P/N Enabled
"High" = TXCLKO16P/N Disabled
This pin is provided with an internal pull-down.
LOCKDET_CMU
LVCMOS
O
N2
CMU Lock Detect
This pin is used to monitor the lock condition of the clock multi-
plier unit.
"Low" = CMU Out of Lock
"High" = CMU Locked
OVERFLOW
LVCMOS
O
M13
Transmit FIFO Overflow
This pin is used to monitor the transmit FIFO status.
"Low" = Normal Status
"High" = Overflow Condition
FIFO_RST
LVTTL,
LVCMOS
I
N13
FIFO Control Reset
FIFO_RST should be held "High" for a minimum of 2 TXP-
CLKOP/N cycles after powering up and during manual FIFO
reset. After the FIFO_RST pin is returned "Low," it will take 8 to
10 TXPCLKOP/N cycles for the FIFO to flush out. Upon an
interrupt indication that the FIFO has an overflow condition, this
pin is used to reset or flush out the FIFO.
"Low" = Normal Operation
"High" = Manual FIFO Reset
NOTE: To automatically reset the FIFO, see FIFO_AUTORST
pin.
This pin is provided with an internal pull-down.
FIFO_AUTORST
LVTTL,
LVCMOS
I
N12
Automatic FIFO Overflow Reset
If this pin is set "High", the STS-48/STM-16 transceiver will
automatically flush the FIFO upon an overflow condition. Upon
power-up, the FIFO should be manually reset by setting
FIFO_RST "High" for a minimum of 2 TXPCLKOP/N cycles.
"Low" = Manual FIFO reset required for Overflow Conditions
"High" = Automatically resets FIFO upon Overflow Detection
This pin is provided with an internal pull-down.
TRANSMITTER SECTION
NAME
LEVEL
TYPE
PIN
DESCRIPTION
相關PDF資料
PDF描述
ZSD100N8TA IC DRIVER SIREN 8-SOIC
ZXCD1210JB16TA IC AMP AUDIO CLASS D 16QFN
ZXFV203N14TC IC AMP VIDEO CFA 3CHAN 14SOIC
020189 FAN 115VAC 254X89MM CLE2T2
020191 FAN 230VAC 254X89MM CLE3T2
相關代理商/技術參數
參數描述
XRT91L81 制造商:EXAR 制造商全稱:EXAR 功能描述:2.488/2.666GBPS OC-48/STM-16 SONET/SDH TRANSCEIVER
XRT91L81IB 制造商:EXAR 制造商全稱:EXAR 功能描述:2.488/2.666GBPS OC-48/STM-16 SONET/SDH TRANSCEIVER
XRT91L82 制造商:EXAR 制造商全稱:EXAR 功能描述:2.488/2.666 GBPS STS-48/STM-16 SONET/SDH TRANSCEIVER
XRT91L82ES 功能描述:總線收發器 Transceiver RoHS:否 制造商:Fairchild Semiconductor 邏輯類型:CMOS 邏輯系列:74VCX 每芯片的通道數量:16 輸入電平:CMOS 輸出電平:CMOS 輸出類型:3-State 高電平輸出電流:- 24 mA 低電平輸出電流:24 mA 傳播延遲時間:6.2 ns 電源電壓-最大:2.7 V, 3.6 V 電源電壓-最小:1.65 V, 2.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-48 封裝:Reel
XRT91L82IB 功能描述:總線收發器 Transceiver RoHS:否 制造商:Fairchild Semiconductor 邏輯類型:CMOS 邏輯系列:74VCX 每芯片的通道數量:16 輸入電平:CMOS 輸出電平:CMOS 輸出類型:3-State 高電平輸出電流:- 24 mA 低電平輸出電流:24 mA 傳播延遲時間:6.2 ns 電源電壓-最大:2.7 V, 3.6 V 電源電壓-最小:1.65 V, 2.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-48 封裝:Reel