參數資料
型號： MR80C32-25SBR
廠商： TEMIC SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, 25 MHz, MICROCONTROLLER, CQCC44
文件頁數： 63/80頁
文件大小： 5152K
代理商： MR80C32-25SBR
263
XMEGA A [MANUAL]
8077I–AVR–11/2012
24.
EBI – External Bus Interface
24.1
Features
Supports SRAM up to:
– 512KB using 2-port EBI
– 16MB using 3-port EBI
Supports SDRAM up to:
– 128Mb using 3-port EBI
Four software configurable chip selects
Software configurable wait state insertion
Can run from the 2x peripheral clock frequency for fast access
24.2
Overview
The External Bus Interface (EBI) is used to connect external peripherals and memory for access through the data
memory space. When the EBI is enabled, data address space outside the internal SRAM becomes available using
dedicated EBI pins.
The EBI can interface external SRAM, SDRAM, and peripherals, such as LCD displays and other memory mapped
devices.
The address space for the external memory is selectable from 256 bytes (8-bit) up to 16MB (24-bit). Various multiplexing
modes for address and data lines can be selected for optimal use of pins when more or fewer pins are available for the
EBI. The complete memory will be mapped into one linear data address space continuing from the end of the internal
SRAM. Refer to “Data Memory” on page 21 for details.
The EBI has four chip selects, each with separate configuration. Each can be configured for SRAM, SRAM low pin count
(LPC), or SDRAM.
The EBI is clocked from the fast, 2x peripheral clock, running up to two times faster than the CPU.
Four-bit and eight-bit SDRAM are supported, and SDRAM configurations, such as CAS latency and refresh rate, are
configurable in software.
For more details on SRAM and SDRAM, and on how these memory types are organized and work, refer to SRAM and
SDRAM-specific documentation and datasheets. This section only contains EBI-specific details.
24.3
Chip Select
The EBI module has four chip select lines (CS0 to CS3), which can be associated with separate address ranges. The
chip selects control which memory or memory mapped external hardware is accessed when a given memory address is
issued on the EBI. Each chip select has separate configuration, and can be configured for SRAM or SRAM low pin count
(LPC). Chip select 3 can also be configured for SDRAM.
Each chip select has a configurable base address and address size, which are used to determine the data memory
address space associated with each chip select.
24.3.1 Base Address
The base address assigned to a chip select is the lowest address in the address space, and determines the first location
in data memory space where the connected memory hardware can be accessed. The base address associated with
each chip select must be on a 4KB boundary.
相關PDF資料
PDF描述
MQ80C52CXXX-30/883D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, CQFP44
MQ80C32E-36/883D 8-BIT, 36 MHz, MICROCONTROLLER, CQFP44
MQ80C154-25/883 8-BIT, 25 MHz, MICROCONTROLLER, CQFP44
MSP430F2003TRSAR 16-BIT, FLASH, 16 MHz, RISC MICROCONTROLLER, PQCC16
MSP430F2012IRSAR 16-BIT, FLASH, 16 MHz, RISC MICROCONTROLLER, PQCC16
相關代理商/技術參數
參數描述
MR80C32-30 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
MR80C32-36 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Microcontroller
MR80C51BH 制造商:ROCHESTER 制造商全稱:ROCHESTER 功能描述:CMOS SINGLE - CHIP 8-BIT MICROCOMPUTER 64K program Memory Space
MR80C86 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:CMOS 16-Bit Microprocessor
MR80C86/B 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Harris Corporation 功能描述:Microprocessor, 16 Bit, 44 Pin, Ceramic, LCC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*