Revision 1.1
237
www.national.com
G
Core Logic Module
(Continued)
4
Fast Path Read Enable/SMI Disable.
When asserted, read Fast Path (an SMI is not generated on reads from specified
addresses).
0: Disable.
1: Enable.
In Fast Path Read the Core Logic module responds to reads of addresses: 388h-38Bh; 2x0h, 2x1, 2x2h, 2x3, 2x8 and 2x9h.
If neither sound card nor FM I/O mapping is enabled, then status read trapping is not possible.
FM I/O Trap.
If this bit is enabled and an access occurs at I/O Port 388h-38Bh, an SMI is generated.
0: Disable.
1: Enable.
Top level SMI status is reported at F1BAR0+I/O Offset 00h/02h[1].
Second level SMI status is reported at F3BAR0+Memory Offset 10h/12h[0].
Sound Card I/O Trap.
If this bit is enabled and an access occurs in the address ranges selected by bits [1:0], an SMI is gen-
erated.
0: Disable.
1: Enable.
Top level SMI status is reported at F1BAR0+I/O Offset 00h/02h[1].
Second level SMI status is reported at F3BAR0+Memory Offset 10h/12h[0].
Third level SMI status is reported at F3BAR0+Memory Offset 14h[10].
Sound Card Address Range Select.
These bits select the address range for the sound card I/O trap.
00: I/O Port 220h-22Fh
10: I/O Port 260h-26Fh
01: I/O Port 240h-24Fh
11: I/O Port 280h-28Fh
3
2
1:0
Offset 1Ah-1Bh
Internal IRQ Enable Register (R/W)
Reset Value: 0000h
15
IRQ15 Internal.
Configures IRQ15 for internal (software) or external (hardware) use.
0: External.
1: Internal.
IRQ14 Internal.
Configures IRQ14 for internal (software) or external (hardware) use.
0: External.
1: Internal.
Reserved.
Must be set to 0.
IRQ12 Internal.
Configures IRQ12 for internal (software) or external (hardware) use.
0: External.
1: Internal.
IRQ11 Internal.
Configures
IRQ11 for internal (software) or external (hardware) use.
0: External.
1: Internal.
IRQ10 Internal.
Configures IRQ10 for internal (software) or external (hardware) use.
0: External.
1: Internal.
IRQ9 Internal.
Configures IRQ9 for internal (software) or external (hardware) use.
0: External.
1: Internal.
Reserved.
Must be set to 0.
IRQ7 Internal.
Configures IRQ7 for internal (software) or external (hardware) use.
0: External.
1: Internal.
Reserved.
Must be set to 0.
IRQ5 Internal.
Configures IRQ5 for internal (software) or external (hardware) use.
0: External.
1: Internal.
14
13
12
11
10
9
8
7
6
5
Table 5-38. F3BAR0+Memory Offset: XpressAUDIO Configuration Registers (Continued)
Bit
Description