參數資料
型號: 73M1922-DB
廠商: Maxim Integrated Products
文件頁數: 30/82頁
文件大?。?/td> 0K
描述: BOARD DEMO 73M1922 20-TSSOP
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 1
主要目的: *
嵌入式:
已用 IC / 零件: *
主要屬性: *
次要屬性: *
已供物品: 板,CD
73M1822/73M1922 Data Sheet
DS_1x22_017
36
Rev. 1.6
5.1
Line-Side Device Register Polling
The Register Map as read from a 73M1x22 Host-Side Device consists of two groups. The first is the
Host-Side Device registers (0x00 through 0x11) and the second is a copy of the Line-Side Device registers
(0x12 through 0x1F).
As an extra degree of integrity the 73M1x22 supports the ability to manually monitor the registers of its Line-
Side Device. This is achieved by using the Manual Poll Function. The Line-Side registers that can be polled
are 0x12 through 0x18.
The method is to write the offset address of the Line-Side Device register to be read into the INDX field. The
value of this is the offset from 0x12; that is, Register 0x12 is 0x0, 0x13 is 0x1, etc. The next step is to set
the POLL bit, which causes the device to read the requested register from the Line-Side Device. The value
of the requested Line-Side Device register is written into POLVAL (0x1F). This value is compared with that
of the Host-Side copy and if they are the same then the MATCH bit is set.
The values presented at MATCH and POLVAL are valid approximately 600
μs (depending upon the clock)
after a poll request, and are valid only after the POLL bit has been reset by the Host-Side Device.
Function
Mnemonic
Register
Location
Type
Description
INDX
0x19[3:0]
W
Index
Address of the register to be manually polled with the results placed in
POLVAL. This address should be cleared after the poll. Default = 0.
MATCH
0x19[6]
R
Polling Match
0 = No match. (Default)
1 = This read-only bit indicates that there is match with the
corresponding polled register in the Host-Side Device. The result of
the polling function can be read only after the POLL bit is reset to zero
by the 73M1x22.
POLL
0x19[7]
W
Polling Enable
0 = Polling disabled. (Default)
1 = Manually polls the control register in the Line-Side Device whose
address is given by INDX. The POLL bit remains high until the
MATCH result is available at which time it will be reset to 0 and the
MATCH bit status can be read.
POLVAL
0x1F[7:0]
R
Polling Value
When 73M1x22 is polled, the content of the Line-Side Device Register
given by the offset address in INDX is placed in this register.
Default = 0. This register can be read after the POLL bit has been
reset to zero, indicating the result is ready.
相關PDF資料
PDF描述
CM453232-R12KL INDUCTOR 120NH 770MA SMD
73S1217F-EB-LITE BOARD EVAL 73S1217F CBL/DOC/CD
UPT2D221MHD6 CAP ALUM 220UF 200V 20% RADIAL
MAX5391NEVMINIQU+ EVAL KIT MAX5391
GSC08DRTN-S93 CONN EDGECARD 16POS DIP .100 SLD
相關代理商/技術參數
參數描述
73M1966B-DB 功能描述:網絡開發工具 73M1966B Demo Brd RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1966B-DB-C 功能描述:網絡開發工具 73M1966B Demo Brd w/GUI Cable RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1966B-EVM 功能描述:網絡開發工具 73M1966 Demo Brd & MotherBrd RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1966B-IM/F 制造商:Maxim Integrated Products 功能描述:
73M1966B-KEYCHN 功能描述:網絡開發工具 Keychain Eval Module RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V