參數資料
型號： 78Q8430-ARM9-EVM
廠商： Maxim Integrated Products
文件頁數： 25/88頁
文件大?。?/td> 0K
描述： EVALUATION MODULE 78Q8430 ARM9
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
系列： *
DS_8430_001
78Q8430 Data Sheet
Rev. 1.2
31
Counter
Address
Counter Description
0x0B
Broadcast packets
0x0C
SQE errors
0x0D
Pause packets transmitted
0x0E
Transmitted bytes
0x0F
Received packets, 63 bytes or less
0x10
Received packets, 64 bytes
0x11
Received packets, 65 to 127 bytes
0x12
Received packets, 128 to 255 bytes
0x13
Received packets, 256 to 511 bytes
0x14
Received packets, 512 to 1023 bytes
0x15
Received packets, 1024 to 1518 (1522 for VLAN tag) bytes
0x16
Received packets, 1519 bytes or more (1523 or more for VLAN tag) bytes
0x17
CRC error and no alignment error
0x18
Alignment errors
0x19
Fragment errors (less than 64 bytes with CRC or alignment error)
0x1A
Jabbers (greater than 1518 or 1522 and CRC or alignment error)
0x1B
MAC errors
0x1C
Dropped packets
0x1D
Classification dropped packet
0x1E
Total received packets with no errors
0x1F
Total received multicast packets with no errors
0x20
Total received broadcast packets with no errors
0x21
Range errors (length field <= 1500 and received data <= 1500 and not control packet and
length field does not match data bytes received and unpadded packet and no
CRC/alignment errors
0x22
Out of range count (length field > 1500 and not control packet 8808)
0x23
Total received VLAN packets with no errors
0x24
Total received Pause packets with no errors
0x25
Total received Control packets with no errors
0x26
Total received bytes with no errors
0x27
Total received bytes with errors but not jabber nor fragment
6.6.2
Reading and Setting Counter Values
Before any counters can be accessed, the CCR value must be set appropriately. Bits 0 to 5 of the CCR
are the Address field. These bits must contain the address of the first counter to be accessed. Bit eight
of the CCR is the Access Mode bit. When the Access Mode bit is clear, the access mode is read. When
the Access Mode bit is set, the access mode is write. Bit nine of the CCR is the Clear on Read bit. The
Clear on Read bit is only relevant when the access mode is read. When the Clear on Read bit is set,
then the counter values are automatically reset to zero after the counter value is read. If a countable
event occurs at the same time as the reset, then the counter value is reset to one such that no countable
events are missed. Bit ten of the CCR must always be set.
Once the CCR has been configured for the desired counter access, the CDR is used to gain access to
the actual counter values. When the CCR Access Mode bit is cleared for read, only read access to the
CDR is allowed, and a read of the CDR will return the value of the counter specified by the CCR Address
field. When the CCR Access Mode bit is set to write, only write access to the CDR is allowed, and the
value written to the CDR will be written to the counter at the address specified by the CCR Address field.
The CCR Address field value is automatically incremented after each read or write access to the CDR
allowing many counters to be accessed through repeated reads or writes on the CDR without the need to
reconfigure the CCR each time. When writing a value to a counter, if a countable event occurs at the
相關PDF資料
PDF描述
VE-24T-EY-S CONVERTER MOD DC/DC 6.5V 50W
M1YXK-2640K IDC CABLE - MPD26K/MC26F/X
382LX392M200N082 CAP ALUM 3900UF 200V 20% SNAP
M3DEK-2606R IDC CABLE - MKR26K/MC26M/MCE26K
ECM30DCBD-S189 CONN EDGECARD 60POS R/A .156 SLD
相關代理商/技術參數
參數描述
78Q8430EBST#DB 功能描述:以太網開發工具 3-in-1 Silicon Delay Line RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
78Q8430STEM#DB 功能描述:以太網開發工具 3-in-1 Silicon Delay Line RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
78-R3 功能描述:3M SCOTCHCAST REENTERABLE SIGNAL 制造商:3m 系列:* 零件狀態:在售 標準包裝:1
78-R4 功能描述:3M SCOTCHCAST REENTERABLE SIGNAL 制造商:3m 系列:* 零件狀態:在售 標準包裝:1
78RB02 功能描述:SWITCH 2 POS DIP RECESSED UNSLD RoHS:否 類別:開關 >> DIP 系列:78 特色產品:RDM Series Rotary DIP Switch 標準包裝:70 系列:RDM 電路:十六進制 位置數:16 觸點額定電壓:0.1A @ 42VDC 觸動器類型:用于工具旋轉 觸動器電平:凹槽式 安裝類型:通孔 方向:頂部觸動 可清洗:是 其它名稱:EG4977-5RDMAR16PIT
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*