
DM9801A
1M Home Phoneline Network Physical Layer Single Chip Transceiver
Final
Version: DM9801A-DS-F01
May 30, 2001
39
RX_PCOM Low A Register - Register 13 (INTFSEL = 1, GPSI Mode)
Bit
Bit Name
13.7 –
13.0
Default
0, RW
Description
RX_PCOM_LOA
RX_PCOM_LOA:
The 15
th
through the 8
th
bits of the 32-bit receive data field to be used for
out-of-band communications between PHY management entities.
A non-null receive PCOM will set the RX_PCOM_VAL bit in the ISTAT
register.
An access of the high byte of the RX_PCOM_HI register will clear the
RX_PCOM_VAL bit in the ISTAT register.
RX_PCOM High B Register - Register 14 (INTFSEL = 1, GPSI Mode)
Bit
Bit Name
14.7 –
14.0
Default
0, RW
Description
RX_PCOM_HIB
RX_PCOM_HIB:
The 23
rd
through the 16
th
bits of the 32-bit receive data field to be used
for out-of-band communications between PHY management entities.
A non-null receive PCOM will set the RX_PCOM_VAL bit in the ISTAT
register.
An access of the high byte of this register will clear the
RX_PCOM_VAL bit in the ISTAT register.
RX_PCOM High A Register - Register 15 (INTFSEL = 1, GPSI Mode)
Bit
Bit Name
15.7 -
15.0
Default
0, RW
Description
RX_PCOM_HIA
RX_PCOM_HIA:
The MSB of the 32-bit receive data field to be used for out-of-band
communications between PHY management entities.
A non-null receive PCOM will set the RX_PCOM_VAL bit in the ISTAT
register.
An access of the high byte of this register will clear the
RX_PCOM_VAL bit in the ISTAT register.
Noise Level Register - Register 16 (INTFSEL = 1, GPSI Mode)
Bit
Bit Name
16.7 -
16.0
Default
0x07, RW
Description
NOISE_LEVEL
NOISE LEVEL:
This is the digital value of the SLICE_LVL_NOISE output. It is
effectively a measure of the noise level on the wire. When auto-
adaptation is enabled (bit 5 of the Control register is false) this register
is updated with the current noise count every 50n Secs. When
adaptation is disabled, this register can be written and is used to
generate both the SLICE_LVL_NOISE and the SLICE_LVL_DATA
signals.
Peak Level Register - Register 17 (INTFSEL = 1, GPSI Mode)
Bit
Bit Name
17.7 -
17.0
Default
0xFF, RW
Description
PEAK_LEVEL
Peak Level:
This is a measurement of the peak level of the last valid (non-collision)
AID received also, the maximum allowable value of the noise
measurement. If NOISE_LEVEL exceeds PEAK_LEVEL,
NOISE_LEVEL is reset to NOISE_FLOOR.