![](http://datasheet.mmic.net.cn/170000/S71PL191HB0BFI100_datasheet_9723326/S71PL191HB0BFI100_80.png)
64
S29PL127H/S29PL129H
S29PL127H_129H_00A1 May 7, 2004
Pr el i m i n ary
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Plastic Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground
VCC (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V OE# and RESET#
(Note 2) . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +13.0 V
WP#/ACC
(Note 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +10.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to VCC +0.5 V Output Short Circuit Current
(Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot VSS to –
2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCC +0.5 V. See Figure 9. During voltage transitions, input or I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns. See Figure 10. 2. Minimum DC input voltage on pins OE#, RESET#, and WP#/ACC is –0.5 V. During voltage transitions, OE#, WP#/ACC,
and RESET# may overshoot VSS to –2.0 V for periods of up to 20 ns. See Figure 9. Maximum DC input voltage on pin OE#, and RESET# is +12.5 V which may overshoot to +14.0 V for periods up to 20 ns. Maximum DC input voltage on
WP#/ACC is +9.5 V which may overshoot to +12.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one
second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only; functional operation of the device at these or any other conditions above
those indicated in the operational sections of this data sheet is not implied. Exposure of the device to
absolute maximum rating conditions for extended periods may affect device reliability.
OPERATING RANGES
Industrial (I) Devices
Ambient Temperature (TA)–40°C to +85°C
Supply Voltages
VCC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.7–3.6 V
VIO (see Note). . . . . . . . . . . . . . . . . . . . . . . . . . . .1.65–1.95 V or 2.7–3.6 V
Note: For all AC and DC specifications, VIO = VCC; contact the local sales office for other VIO options.
Operating ranges define those limits between which the functionality of the device is guaranteed.
Figure 9. Maximum Negative
Overshoot Waveform
Figure 10. Maximum Positive Overshoot Waveform
20 ns
+0.8 V
–0.5 V
20 ns
–2.0 V
20 ns
VCC
+2.0 V
VCC
+0.5 V
20 ns
2.0 V