參數資料
型號： CS8952-IQZ
廠商： Cirrus Logic Inc
文件頁數： 49/81頁
文件大?。?/td> 0K
描述： IC TXRX 100/10 PHY 100TQFP
標準包裝： 90
類型： 收發器
規程： MII
電源電壓： 4.75 V ~ 5.25 V
安裝類型： 表面貼裝
封裝/外殼： 100-LQFP
供應商設備封裝： 100-TQFP（14x14）
包裝： 托盤
產品目錄頁面： 759 (CN2011-ZH PDF)
其它名稱： 598-1208
CS8952
CrystalLAN 100BASE-X and 10BASE-T Transceiver
53
DS206F1
9MF Preamble
Enable
Read/Write 0
When set, this bit will force all management frames
(via MDIO, MDC) to be preceded by a 32 bit pream-
ble pattern of contiguous ones to be considered
valid. When cleared, it allows management frames
with or without the preamble pattern. The status of
this register is (inversely) reflected in the MF Pream-
ble bit in the Basic Mode Status Register (address
01h).
Note: This bit is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
8
Fast Test
Read/Write 0
When set, internal timers are sped up significantly in
order to facilitate production test. Leave clear for
proper operation.
Note: This bit is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
7
CLK25 Disable
Read/Write When TCM pin is
low, reset to 1;
otherwise, reset to
0
Setting this bit will disable (tri-state) the CLK25 out-
put pin, reducing digital noise and power consump-
tion.
6
Enable LT/100
Read/Write 1
When set, normal link status checking is enabled.
When clear, this bit forces the link status to Link OK
(at 100 Mb/s), and will assert the LINK_OK LED.
5
CIM Disable
Read/Write Reset to the logic
inverse of the
value on the
REPEATER pin.
When set, this bit forces the Carrier Integrity Monitor
function to be disabled. When low, the Carrier Integ-
rity Monitor function is enabled, and detection of an
unstable link will disable the receive and transmit
functions.
4
Tx Disable
Read/Write 0
When set, this bit forces the 10 Mb/s and 100 Mb/s
outputs to be inactive. When clear, normal transmis-
sion is enabled.
If Tx Disable is set while a packet is being transmit-
ted, transmission is completed and no subsequent
packets are transmitted until Tx Disable is cleared
again. Also, if Tx Disable is cleared while TX_EN is
high, the transmitter will remain disabled until TX_EN
is deasserted. This prevents fragments from being
transmitted onto the network.
BIT
NAME
TYPE
RESET
DESCRIPTION
相關PDF資料
PDF描述
CY8CLED04DOCD1-56LTXI IC POWERPSOC DEBUG 4CH 1A 56VQFN
CYG2217 IC MOD PHONE LINE WIRE 1.07" PCB
DAC312ER IC DAC 12BIT MULT HS 20-CDIP
DAC8143FPZ IC DAC 12BIT DAISYCHAIN 16DIP
DAC8228FSZ IC DAC 8BIT DUAL V-OUT 20SOIC
相關代理商/技術參數
參數描述
CS8952-IQZR 功能描述:以太網 IC IC 100BASE-TX and 10BASE-T Transceiver RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
CS8952T 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:100BASE E-X AND 10BASE-T TRANSCEIVER
CS8952T-CQ 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:100BASE E-X AND 10BASE-T TRANSCEIVER
CS8952T-IQ 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:100BASE E-X AND 10BASE-T TRANSCEIVER
CS8952T-IQR 制造商:Cirrus Logic 功能描述:ETHERNET TXRX SGL CHIP 1-PORT 5V 10MBPS/100MBPS 100TQFP - Tape and Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*