HITACHI 315
Bits 7–4 (reserved): These bits always read as 1. The write value should always be 1.
Bit 3 (group 3 non-overlap mode (G3NOV)): G3NOV selects the ordinary or non-overlap
mode for TPC output group 3 (TP15–TP12).
Bit 3: G3NOV
Description
0
TPC output group 3 operates normally (output value updated according
to compare-match A of the ITU channel selected by TPCR) (initial
value)
1
TPC output group 3 operates in non-overlap mode (1 output and 0
output can be performed independently according to compare-match A
and B of the ITU channel selected by TPCR)
Bit 2 (group 2 non-overlap mode (G2NOV)): G2NOV selects the ordinary or non-overlap
mode for TPC output group 2 (TP11–TP8).
Bit 2: G2NOV
Description
0
TPC output group 2 operates normally (output value updated according
to compare-match A of the ITU channel selected by TPCR) (initial
value)
1
TPC output group 2 operates in non-overlap mode (1 output and 0
output can be performed independently according to compare-match A
and B of the ITU channel selected by TPCR)
Bit 1 (group 1 non-overlap mode (G1NOV)): G1NOV selects the ordinary or non-overlap
mode for TPC output group 1 (TP7–TP4).
Bit 1: G1NOV
Description
0
TPC output group 1 operates normally (output value updated according
to compare-match A of the ITU channel selected by TPCR) (initial
value)
1
TPC output group 1 operates in non-overlap mode (1 output and 0
output can be performed independently according to compare-match A
and B of the ITU channel selected by TPCR)
Bit 0 (group 0 non-overlap mode (G0NOV)): G0NOV selects the ordinary or non-overlap
mode for TPC output group 0 (TP3–TP0).