Revision 1.1
245
www.national.com
G
Core Logic Module
(Continued)
Offset 49h
Audio Bus Master 5: Input from codec; 16-Bit; Slot 6 or 11 (F3BAR0+Memory Offset 08h[20] selects slot).
Audio Bus Master 5 SMI Status Register (RC)
Reset Value: 00h
7:2
1
Reserved
Bus Master Error.
Indicates if hardware encountered a second EOP before software cleared the first.
0: No.
1: Yes.
If hardware encounters a second EOP (end of page) before software cleared the first, it causes the bus master to pause until
this register is read to clear the error.
End of Page.
Indicates if the Bus master transferred data which is marked by the EOP bit in the PRD table (bit 30).
0: No.
1: Yes.
0
Offset 4Ah-4Bh
Not Used
Offset 4Ch-4Fh
Audio Bus Master 5: Input from codec; 16-Bit; Slot 6 or 11 (F3BAR0+Memory Offset 08h[20] selects slot).
Audio Bus Master 5 PRD Table Address (R/W)
Reset Value: 00000000h
31:2
Pointer to the Physical Region Descriptor Table.
This bit field contains a PRD table pointer for Audio Bus Master 5.
When written, this register points to the first entry in a PRD table. Once Audio Bus Master 5 is enabled (Command Register
bit 0 = 1), it loads the pointer and updates this register (by adding 08h) so that it points to the next PRD.
When read, this register points to the next PRD.
Reserved.
Must be set to 0.
The Physical Region Descriptor (PRD) table consists of one or more entries - each describing a memory region to or from
which data is to be transferred. Each entry consists of two DWORDs.
1:0
Note:
DWORD 0:
DWORD 1:
[31:0]
31
30
29
[28:16]
[15:0]
= Memory Region Physical Base Address
= End of Table Flag
= End of Page Flag
= Loop Flag (JMP)
= Reserved (0)
= Byte Count of the Region (Size)
Table 5-38. F3BAR0+Memory Offset: XpressAUDIO Configuration Registers (Continued)
Bit
Description