48
MPC755 RISC Microprocessor Hardware Specifications
MOTOROLA
Ordering Information
1.10 Ordering Information
Ordering information for the parts fully covered by this specification document is provided in
Section 1.10.1, “Part Numbers Fully Addressed by This Document.” Section 1.10.2, “Part Numbers Not
Fully Addressed by This Document,” lists the part numbers which do not fully conform to the specifications
of this document. These special part numbers require an additional document called a part number
specification.
1.10.1 Part Numbers Fully Addressed by This Document
Table 20 provides the Motorola part numbering nomenclature for the MPC755 and MPC745. Note that the
individual part numbers correspond to a maximum processor core frequency. For available frequencies,
contact your local Motorola sales office. In addition to the processor frequency, the part numbering scheme
also includes an application modifier which may specify special application conditions. Each part number
also contains a revision code which refers to the die mask revision number.
1.10.2 Part Numbers Not Fully Addressed by This Document
Parts with application modifiers or revision levels not fully addressed in this specification document are
described in separate part number specifications which supplement and supersede this document; see
Table 21.
Table 20. Part Numbering Nomenclature
XPC
xxx
x
xx
nnn
x
x
Product
Code
Part
Identifier
Process
Descriptor
Package
1
Processor
Frequency
2
Application
Modifier
Revision Level
MPC
XPC
3
755
745
B = HiP4DP PX = PBGA
RX = CBGA
300
350
400
L:
2.0 V ±100 mV
0
°
to 105
°
C
E: 2.8; PVR = 0008 3203
755
C = HiP4DP RX = CBGA
450
Notes:
1. See Section 1.7, “Package Description,” for more information on available package types.
2. Processor core frequencies supported by parts addressed by this specification only. Not all parts described in
this specification support all core frequencies. Additionally, parts addressed by Part Number Specifications
may support other maximum core frequencies.
3. The P prefix in a Motorola part number designates a “Pilot Production Prototype” as defined by Motorola
SOP 3-13. These parts have only preliminary reliability and characterization data. Before pilot production
prototypes may be shipped, written authorization from the customer must be on file in the applicable sales
office acknowledging the qualification status and the fact that product changes may still occur while shipping
pilot production prototypes.