參數資料
型號： M37920FCCGP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
封裝： 14 X 20 MM, 0.65 MM PITCH, PLASTIC, QFP-100
文件頁數： 117/158頁
文件大小： 1261K
代理商： M37920FCCGP
61
M37920FCCGP, M37920FCCHP
M37920FGCGP, M37920FGCHP
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
MITSUBISHI MICROCOMPUTERS
Transmission
clock
TEj
1/fi
× (n + 1) × 2
1/fi
× (n + 1) × 2
TIj
CTSj
Write in transmit buffer register
D0 D1 D2 D3 D4 D5 D6 D7
D1 D2 D3 D4 D5 D6 D7
D0 D1 D2 D3 D4 D5 D6 D7
D0
Transmit register
←Transmit buffer register
Stopped because TEj = “0”
CLKj
TENDj
TXDj
TXEPTYj
Fig. 57 Clock synchronous serial I/O timing
Interrupt request at completion of reception
When the RIk flag changes from “0” to “1”, in other words, when the
receive operation is completed, the interrupt request bit of the
UARTk receive interrupt control register can be set to “1”.
The timing when this interrupt request bit is to be set to “1” can be
selected from the following:
Each reception
When an error occurs at reception
If bit 5 of the UARTk transmit/receive control register 0 (UARTk re-
ceive interrupt mode select bit) is cleared to “0”, the interrupt request
bit is set to “1” at each reception. If bit 5 is set to “1”, the interrupt re-
quest bit is set to “1” only when an error occurs. (In the clock syn-
chronous serial communication, only when an overrun error occurs,
the interrupt request bit is set to “1”.)
Note that a DMA request is affected by the UART receive interrupt
mode select bit if the UARTi reception is selected as a DMA request
source of the DMA controller.
When the UARTk receive interrupt mode select bit is cleared to “0”,
a DMA request is generated at each UART reception. When the
UARTk receive interrupt mode select bit is set to “1”, a DMA request
is generated only at normal UART reception. (In other words, no
DMA request is generated when an error has occurred.)
Polarity of transfer clock
In the clock synchronous serial communication, by bit 6 of the UARTj
transmit/receive control register 0 (CPL), the polarity of a transfer
clock can be selected.
As shown in Figure 58, when bit 6 = “0”, the polarity is as follows:
In transmission, transmit data is output at the falling edge of CLKj.
In reception, receive data is input at the rising edge of CLKk.
When not in transfer, CLKi is at “H” level.
When bit 6 = “1”, the polarity is as follows:
In transmission, transmit data is output at the rising edge of CLKj.
In reception, receive data is input at the rising edge of CLKk.
When not in transfer, CLKi is at “L” level.
相關PDF資料
PDF描述
M38039MFL-XXXWG 8-BIT, MROM, 16.8 MHz, MICROCONTROLLER, PBGA64
M38039FFLSP 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PDIP64
M38039FFLKP 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PQFP64
M38049FFLWG 8-BIT, FLASH, 16.8 MHz, MICROCONTROLLER, PBGA64
M38102M5-XXXSP 8-BIT, MROM, 4.19 MHz, MICROCONTROLLER, PDIP64
相關代理商/技術參數
參數描述
M37920FCCHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920FGCGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920FGCHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
M37920S4CGP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:16 BIT CMOS MICROCOMPUTER
M37P75C4P3 功能描述:汽車連接器 Pin Contact RoHS:否 制造商:Amphenol SINE Systems 產品:Contacts 系列:ATP 位置數量: 型式:Female 安裝風格: 端接類型: 觸點電鍍:Nickel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*