www.ti.com
8.12 Host-Port Interface (HPI) Peripheral
8.12.1 HPI Device-Specific Information
8.12.2 HPI Peripheral Register Description(s)
TMS320TCI6482
Communications Infrastructure Digital Signal Processor
SPRS246F–APRIL 2005–REVISED MAY 2007
The TCI6482 device includes a user-configurable 16-bit or 32-bit Host-port interface (HPI16/HPI32). The
AEA14 pin controls the HPI_WIDTH, allowing the user to configure the HPI as a 16-bit or 32-bit peripheral.
Software handshaking via the HRDY bit of the Host Port Control Register (HPIC) is not supported on the
TCI6482.
An HPI boot is terminated using a DSP interrupt. The DSP interrupt is registered in bit 0 (channel 0) of the
EDMA Event Register (ER). This event must be cleared by software before triggering transfers on DMA
channel 0.
Table 8-54. HPI Control Registers
HEX ADDRESS RANGE
0288 0000
ACRONYM
-
REGISTER NAME
COMMENTS
Reserved
The CPU has read/write
access to the
PWREMU_MGMT register;
the Host does not have any
access to this register.
0288 0004
PWREMU_MGMT
HPI power and emulation management register
0288 0008 - 0288 0024
0288 0028
0288 002C
-
-
-
Reserved
Reserved
Reserved
The Host and the CPU have
read/write access to the
HPIC register.
(1)
0288 0030
HPIC
HPI control register
HPIA
HPI address register
(Write)
HPI address register
(Read)
Reserved
Reserved
The Host has read/write
access to the HPIA registers.
The CPU has only read
access to the HPIA registers.
0288 0034
(HPIAW)
(2)
HPIA
(HPIAR)
(2)
-
-
0288 0038
0288 000C - 028B 007F
0288 0080 - 028B FFFF
(1)
The CPU can write 1 to the HINT bit to generate an interrupt to the host and it can write 1 to the DSPINT bit to clear/acknowledge an
interrupt from the host.
There are two 32-bit HPIA registers: HPIAR for read operations and HPIAW for write operations. The HPI can be configured such that
HPIAR and HPIAW act as a single 32-bit HPIA (single-HPIA mode) or as two separate 32-bit HPIAs (dual-HPIA mode) from the
perspective of the host. The CPU can access HPIAW and HPIAR independently. For details about the HPIA registers and their modes,
see the
TMS320TCI648x DSP Host Port Interface (HPI) User's Guide
(literature number
SPRU874
).
(2)
176
C64x+ Peripheral Information and Electrical Specifications
Submit Documentation Feedback