參數資料
型號： T8100A
英文描述： H.100/H.110 Interface and Time-Slot Interchangers
中文描述： H.100/H.110接口和時隙Interchangers
文件頁數： 28/112頁
文件大小： 1408K
代理商： T8100A
24
Lucent Technologies Inc.
Advance Data Sheet
November 1999
H.100/H.110 Interfaces and Time-Slot Interchangers
Ambassador T8100A, T8102, and T8105
2 Architecture and Functional Description
(continued)
2.2 Local Bus Section
(continued)
2.2.1 Constant Frame Delay and Minimum Delay Connections
The local bus section contains the local connection memory (T8100A, T8105 only) and the double-buffered local
data memory. Collectively, the connection memory and data memory are referred to as local memory since it is
used for implementing local-to-local switching only. Operation is similar to other time-slot interchangers. Data is
written into the memory in a fixed order and then read out according to the indirect addresses held in the connec-
tion memory. If any of the connections on the devices are operating in constant frame delay (also called constant
delay) mode, then the output data is accessed from a second block of data memory. The input data will not be out-
put until the next frame boundary has been crossed and the memory blocks have swapped functions. Figure 5
shows an example of a set of connections which create the delay types referred to as minimum delay and constant
delay.
5-6103F
Figure 5. Local Bus Memory Connection Modes
2.2.2 Serial and Parallel
Nominally, the memory will be accessed by serial data streams which will require conversion of serial-to-parallel
(S/P) for write accesses and parallel-to-serial (P/S) for read accesses. Since the local memory can have up to 16
serial inputs and 16 serial outputs, there will be a maximum of 16 S/P converters and 16 P/S converters operating
simultaneously. If desired, eight of the S/P converters, local inputs 0—7, can be bypassed for a direct parallel write
to the data memory. Likewise, eight of the P/S converters, local outputs 0—7, can be bypassed for a direct parallel
read of the data memory. Unused S/P or P/S converters are nonfunctional in these modes.
Note:
The normal serial-to-serial local streaming is not available simultaneously with any of the parallel modes.
FRAME N DATA
DATA BLOCK 0
0
1
2
3
1020
1021
1022
1023
WRITE N
READ N
MINIMUM DELAY
CONNECTION
FRAME N – 1 DATA
DATA BLOCK 1
0
1
2
3
1020
1021
1022
1023
READ N – 1
CONSTANT DELAY
CONNECTION
FRAME N DATA
DATA BLOCK 0
0
1
2
3
1020
1021
1022
1023
READ N
CONSTANT DELAY
CONNECTION
FRAME N + 1 DATA
DATA BLOCK 1
0
1
2
3
1020
1021
1022
1023
WRITE N + 1
READ N + 1
MINIMUM DELAY
CONNECTION
FRAME N + 1
FRAME N
相關PDF資料
PDF描述
T8102A H.100/H.110 Interface and Time-Slot Interchangers
T8105A H.100/H.110 Interface and Time-Slot Interchangers
T8100 H.100/H.110 Interface and Time-Slot Interchanger
T8110 Version History
T8301 T8301 Internet Protocol Telephone Phone-On-A-Chip⑩ IP Solution DSP
相關代理商/技術參數
參數描述
T8100A-BAL 制造商:Alcatel-Lucent 功能描述:ELECTRONIC COMPONENT
T8100A-BAL4DB 制造商:AGERE 功能描述:
T8100-D 制造商:GE Sensing & Inspection Technologies 功能描述:CO2/TEMP SENS WALL MNT DUAL OUT
T8100-E 制造商:GE Sensing & Inspection Technologies 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP 制造商:GE MEASUREMENT & CONTROL 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes 制造商:GE MEASUREMENT & CONTROL/GE SENSING 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes
T8100-E-D 制造商:GE Sensing & Inspection Technologies 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP 制造商:GE MEASUREMENT & CONTROL 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes 制造商:GE MEASUREMENT & CONTROL/GE SENSING 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*