參數資料
型號： T8100A
英文描述： H.100/H.110 Interface and Time-Slot Interchangers
中文描述： H.100/H.110接口和時隙Interchangers
文件頁數： 82/112頁
文件大?。?/td> 1408K
代理商： T8100A
78
Lucent Technologies Inc.
Advance Data Sheet
November 1999
H.100/H.110 Interfaces and Time-Slot Interchangers
Ambassador T8100A, T8102, and T8105
3 Using the TSI Devices
(continued)
3.4 Using the LAR, AMR, and IDR for Connections
(continued)
3.4.3 Programming Examples
;All programming examples included are in a pseudoassembler format.
;The basic commands used are the “move direct” and “move indirect.”
;A move direct command is indicated by the letters “MD” followed by
;the register name, then the data. Similarly, a move indirect command
;is indicated by the letters “MI” followed by the register name, then by
;data or another register reference (the register may not be indirect).
;The semicolon delineates comments. Direct data is followed by the
;letter “h” for Hex and “b” for binary.
;*******EXAMPLE #1 - Set Up Clocks, Local Bus, H-Bus, and Framers
;
;*******Misc. Stuff
;
MD,AMR,00h
;Define control space
;all specific register names are equivalent
;to the LAR addresses (from Table 11)
;
;
;*******Set up Clocks
;**Main Clock Register
MD,IDR,0C2h
;Load IDR with values for bit slider on, slave mode,
;and synced to ECTF Bus A Clocks
MI,CKM,IDR
;The data in IDR is moved into CKM via the LAR register.
;
;**NETREF Registers
MD,IDR,88h
;Set up NETREF from Local Reference 0, 2.048 MHz bit clock
in, divided value
;value out (i.e., 8 kHz), enable the DJAT connections
MI,CKN,IDR
;Move the data to CKN
MD,IDR,0FFh
;Set up NETREF divider with divide-by-256
MI,CKND,IDR
;Move the data to CKND
;
;**Programmable Clocks
MD,IDR,26h
;This selects the oscillator for the TCLKOUT, A Clock
outputs off, and
;driving ECTF B Clocks
MI,CKP,IDR
;Move the data
;
;**Clock Resources
MD,IDR,40h
;Synced to bus so select Resource divider, x16 on PLL #1 &
x8 PLL #2, SC Clocks off
MI,CKR,IDR
;Make it so
MD,IDR,01h
;Set up Resource divider with divide-by-2 for 4 MHz signal
into PLL #1
MI,CKRD,IDR
;Move the data to divider
;
相關PDF資料
PDF描述
T8102A H.100/H.110 Interface and Time-Slot Interchangers
T8105A H.100/H.110 Interface and Time-Slot Interchangers
T8100 H.100/H.110 Interface and Time-Slot Interchanger
T8110 Version History
T8301 T8301 Internet Protocol Telephone Phone-On-A-Chip⑩ IP Solution DSP
相關代理商/技術參數
參數描述
T8100A-BAL 制造商:Alcatel-Lucent 功能描述:ELECTRONIC COMPONENT
T8100A-BAL4DB 制造商:AGERE 功能描述:
T8100-D 制造商:GE Sensing & Inspection Technologies 功能描述:CO2/TEMP SENS WALL MNT DUAL OUT
T8100-E 制造商:GE Sensing & Inspection Technologies 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP 制造商:GE MEASUREMENT & CONTROL 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes 制造商:GE MEASUREMENT & CONTROL/GE SENSING 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes
T8100-E-D 制造商:GE Sensing & Inspection Technologies 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP 制造商:GE MEASUREMENT & CONTROL 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes 制造商:GE MEASUREMENT & CONTROL/GE SENSING 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*