參數資料
型號： T8100A
英文描述： H.100/H.110 Interface and Time-Slot Interchangers
中文描述： H.100/H.110接口和時隙Interchangers
文件頁數： 61/112頁
文件大小： 1408K
代理商： T8100A
Lucent Technologies Inc.
57
Advance Data Sheet
November 1999
H.100/H.110 Interfaces and Time-Slot Interchangers
Ambassador T8100A, T8102, and T8105
2 Architecture and Functional Description
(continued)
2.5 Clocking Section
(continued)
2.5.9 LREF Pairing
The Ambassadordevices have a feature which is programmable by software called LREF pairing (a pair of pins).
This means that a pair of synchronizing clocks (a bit clock and a frame clock) can be input through the LREF port,
and the T810X will phase-lock and derive all of its timing from them. LREF pairing can be considered as an exten-
sion to the CT_C8A, CT_C8B, and CT_FRAME_A, CT_FRAME_B pairs of clocks. When this option is selected,
the onboard DPLL is bypassed and the LREF frame input becomes the internal frame synchronization clock. The
LREF bit clock is routed to the dividers and finally to the analog PLL.
2.5.9.1 LREF Port Configuration
When LREF pairing is enabled (CON register, bit 4 = 1), the LREF port is configured as described in Table 53. The
pairs must be used as listed in the table (they cannot be mixed and/or matched). In addition to the enable/disable
control bit, the CON register has 2 additional control bits for inverting the frame strobe and bit clock.
Table 53. LREF Pairs
Table 54. CKM (0x00) CKSEL Values to Select LREF Pairs
To use LREF pairing, the bits 3:0 (CKSEL) in the CKM register must be programmed to one of the following values
to select one of the LREF pairs as the input.
Notes:
1. If the CKSEL value is LREF4—LREF7 (0x1100—0x1111) as the input source, LREF pairing will not function.
2. CKSEL must be programmed to select LREF0—LREF3 in order to have LREF pairing.
3. Each LREF pair must be phase-locked together. Otherwise, the device timing will function incorrectly, causing unpredictable results.
Input Pins
LREF0
LREF4
LREF1
LREF5
LREF2
LREF6
LREF3
LREF7
Description
Bit clock
Frame synchronization clock
Bit clock
Frame synchronization clock
Bit clock
Frame synchronization clock
Bit clock
Frame synchronization clock
Symbol
CKSEL
Bit
3—0
Description
CKSEL = 1000, sets LREF0 as bit clock input and
sets LREF4 as frame sync input.
CKSEL = 1001, sets LREF1 as bit clock input and
sets LREF5 as frame sync input.
CKSEL = 1010, sets LREF2 as bit clock input and
sets LREF6 as frame sync input.
CKSEL = 1011, sets LREF3 as bit clock input and
sets LREF7 as frame sync input.
相關PDF資料
PDF描述
T8102A H.100/H.110 Interface and Time-Slot Interchangers
T8105A H.100/H.110 Interface and Time-Slot Interchangers
T8100 H.100/H.110 Interface and Time-Slot Interchanger
T8110 Version History
T8301 T8301 Internet Protocol Telephone Phone-On-A-Chip⑩ IP Solution DSP
相關代理商/技術參數
參數描述
T8100A-BAL 制造商:Alcatel-Lucent 功能描述:ELECTRONIC COMPONENT
T8100A-BAL4DB 制造商:AGERE 功能描述:
T8100-D 制造商:GE Sensing & Inspection Technologies 功能描述:CO2/TEMP SENS WALL MNT DUAL OUT
T8100-E 制造商:GE Sensing & Inspection Technologies 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP 制造商:GE MEASUREMENT & CONTROL 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes 制造商:GE MEASUREMENT & CONTROL/GE SENSING 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes
T8100-E-D 制造商:GE Sensing & Inspection Technologies 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP 制造商:GE MEASUREMENT & CONTROL 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes 制造商:GE MEASUREMENT & CONTROL/GE SENSING 功能描述:TRANSMITTER, CO2, HUMIDITY, TEMP; Plug Type:- ;RoHS Compliant: Yes
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*