Revision 1.1
201
www.national.com
G
Core Logic Module
(Continued)
6
IRQ6 Source.
Selects the interface source of the IRQ6 signal.
0: ISA (IRQ6, unavailable externally).
1: LPC (SERIRQ, ball A24) and program PMR[16] = 1.
IRQ5 Source.
Selects the interface source of the IRQ5 signal.
0: ISA (IRQ5, unavailable externally).
1: LPC (SERIRQ, ball A24) and program PMR[16] = 1.
IRQ4 Source.
Selects the interface source of the IRQ4 signal.
0: ISA (IRQ4, unavailable externally).
1: LPC (SERIRQ, ball A24) and program PMR[16] = 1.
IRQ3 Source.
Selects the interface source of the IRQ3 signal.
0: ISA (IRQ3, unavailable externally).
1: LPC (SERIRQ, ball A24) and program PMR[16] = 1.
Reserved.
Must be set to 0.
IRQ1 Source.
Selects the interface source of the IRQ1 signal.
0: ISA (IRQ1, unavailable externally).
1: LPC (SERIRQ, ball A24) and program PMR[16] = 1.
IRQ0 Source.
Selects the interface source of the IRQ0 signal.
0: ISA (IRQ0 internal signal - Connected to OUT0, System Timer, of the internal 8254 PIT).
1: LPC (SERIRQ, ball A24) and program PMR[16] = 1.
5
4
3
2
1
0
Offset 04h-07h
SERIRQ_LVL — Serial IRQ Level Control Register (R/W)
Reset Value: 00000000h
31:21
20
Reserved
INTD# Polarity.
If LPC is selected as the interface source for INTD# (F0BAR1+I/O Offset 00h[20] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
INTC# Polarity.
If LPC is selected as the interface source for INTC# (F0BAR1+I/O Offset 00h[19] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
INTB# Polarity.
If LPC is selected as the interface source for INTB# (F0BAR1+I/O Offset 00h[18] = 1), this bit allows signal
polarity selection.
0:
Active high.
1:
Active low.
INTA# Polarity.
If LPC is selected as the interface source for INTA# (F0BAR1+I/O Offset 00h[17] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
Reserved.
Must be set to 0.
IRQ15 Polarity.
If LPC is selected as the interface source for IRQ15 (F0BAR1+I/O Offset 00h[15] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
IRQ14 Polarity.
If LPC is selected as the interface source for IRQ14 (F0BAR1+I/O Offset 00h[14] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
IRQ13 Polarity.
If LPC is selected as the interface source for IQR13 (F0BAR1+I/O Offset 00h[13] = 1), this bit allows signal
polarity selection.
0: Active high.
1: Active low.
19
18
17
16
15
14
13
Table 5-31. F0BAR1+I/O Offset xxh: LPC Interface Configuration Registers (Continued)
Bit
Description