Data Sheet
June 2002
TMXF28155 Supermapper
155/51 Mbits/s SONET/SDH x28/x21 DS1/E1
397
Agere Systems Inc.
17 TMUX Functional Description
(continued)
17.6.10 F2 Byte Insert
When TMUX_THSF2INS
= 1 (
Table 118 on page 107
), the value in TMUX_TF2INS[1—3][7:0] (
Table 124 on
page 112
) is inserted into the outgoing
signal. Otherwise, the associated POAC value is inserted when
TMUX_TPOAC_F2 = 1 (
Table 128 on page 117
). If both TMUX_THSF2INS and TMUX_TPOAC_F2 = 0, then the
value inserted depends on the value of microprocessor interface block SMPR_OH_DEFLT (
Table 77 on page 70
)
bit. If SMPR_OH_DEFLT
= 0, then all zeros are inserted. If SMPR_OH_DEFLT = 1, then all ones are inserted.
17.6.11 H4 Insert Control
A 4-byte sequence (0, 1, 2, and 3) will be inserted into the outgoing H4 bytes. Note that the assertion of pin TLSV1
(pin AB3) occurs after the J1 byte(s) during the frame where the H4 count equals one.
17.6.12 F3 Byte Insert
When TMUX_THSF3INS
= 1 (
Table 118
), the value in TMUX_TF3INS[1—3][7:0] (
Table 124 on page 112
) is
inserted into the outgoing
signal. Otherwise, the associated POAC value is inserted when TMUX_TPOAC_F3
= 1
(
Table 128 on page 117
). If both TMUX_THSF3INS and TMUX_TPOAC_F3 = 0, then the value inserted depends
on the value of microprocessor interface block SMPR_OH_DEFLT (
Table 77 on page 70
) bit. If
SMPR_OH_DEFLT
= 0, then all zeros are inserted. If SMPR_OH_DEFLT = 1, then all ones are inserted.
17.6.13 K3 Byte Insert
When TMUX_THSK3INS = 1 (
Table 118 on page 107
), the value in TMUX_TK3INS[1—3][7:0] (
Table 124
)
is
inserted into the outgoing
signal. Otherwise, the associated POAC value is inserted when TMUX_TPOAC_K3 = 1
(
Table 128 on page 117
). If both TMUX_THSK3INS and TMUX_TPOAC_K3 = 0, then the value inserted depends
on the value of microprocessor interface block SMPR_OH_DEFLT (
Table 77 on page 70
) bit. If
SMPR_OH_DEFLT
= 0, then all zeros are inserted. If SMPR_OH_DEFLT = 1, then all ones are inserted.
17.6.14 N1 Byte Insert
When TMUX_THSN1INS = 1 (
Table 118 on page 107
), the value in TMUX_TN1INS[1—3][7:0] (
Table 124 on
page 112
) is inserted into the outgoing signal. Otherwise, the associated POAC value is inserted when
TMUX_TPOAC_N1 = 1 (
Table 128
). If both TMUX_THSN1INS and TMUX_TPOAC_N1 = 0, then the value
inserted depends on the value of microprocessor interface block SMPR_OH_DEFLT (
Table 77 on page 70
) bit. If
SMPR_OH_DEFLT
= 0, then all zeros are inserted. If SMPR_OH_DEFLT = 1, then all ones are inserted.
17.6.15 MSP 1 + 1 Payload Switch
For the working transmit high-speed data output (THSDP/N, pins AF9/AE9), it is possible to select the normal
transmit path low-speed data by setting TMUX_TPSMUXSEL2 = 0 (
Table 116 on page 105
), or the receive-side
protection input data by setting TMUX_TPSMUXSEL2 = 1. Note that if the receive-side protection input is selected,
then the local clock and frame sync are generated based on the receive-side protection inputs as well.
To create the transmit high-speed protection outputs (TPSD155P/N and TPSC155P/N; pins AF13/AE13 and
AC12/AD13), it is possible to select the normal transmit path low-speed input data with TMUX_TPSMUXSEL3 = 0
(
Table 116 on page 105
) or the receive-side working inputs with TMUX_TPSMUXSEL3 = 1.
Note:
Clocks and timing signals are selected by TMUX_TPSMUXSEL3 as well as the parallel data.
17.6.16 Transmit Transport Overhead Access Channel (TTOAC)
The TMUX provides a transmit transport overhead access channel (TTOAC) to provision the TOH portion of the
outgoing frame. The TTOAC channel supports three modes of operation based on values in
TMUX_TTOAC_D13MODE and TMUX_TTOAC_D412MODE (
Table 127 on page 115
).