TMXF28155 Supermapper
155/51 Mbits/s SONET/SDH x28/x21 DS1/E1
Data Sheet
June 2002
88
Agere Systems Inc.
8 TMUX Registers
(continued)
Table 93. TMUX_RPOH[1—3]_DLT, Delta/Event (COR/COW)
(continued)
Address
Bit
Name
Function
Reset
Default
0
0x40009
10
TMUX_RK3MOND3
Receive K3 Monitor Delta.
This delta bit indicates a change in
state in TMUX_K3MON3[7:0] (
Table 114 on page 103
), which
is updated when a consecutive and consistent value is
detected in the incoming K3 byte for TMUX_CNTDK3[3:0]
(
Table 109 on page 101
) frames on port 2. Only port 1 informa-
tion is valid in AU-4 mode and in STS-1 mode. The mask bit is
TMUX_RK3MONM3 (
Table 97 on page 91
).
TMUX_RF3MOND3
Receive F3 (Path User Byte) Monitor Delta.
This delta bit
indicates a change in state in TMUX_F3MON03[7:0]
(
Table 114 on page 103
), which is updated when a consecutive
and consistent value is detected in the incoming F3 byte for
TMUX_CNTDF3[3:0] (
Table 109 on page 101
) frames on port
3. Only port 1 information is valid in AU-4 mode and in STS-1
mode. The mask bit is TMUX_RF3MONM3 (
Table 97 on
page 91
).
TMUX_RF2MOND3
Receive F2 (Path User Byte) Monitor Delta.
This delta bit
indicates a change in state in TMUX_F2MON03[7:0]
(
Table 114 on page 103
), which is updated when a consecutive
and consistent value is detected in the incoming F2 byte for
TMUX_CNTDF2[3:0] (
Table 109 on page 101
) frames on port
3. Only port 1 information is valid in AU-4 mode and in STS-1
mode. The mask bit is TMUX_RF2MONM3 (
Table 97 on
page 91
).
TMUX_RDIPD3
Receive Path RDI (Remote Defect Indication) Monitor
Delta.
This delta bit indicates a change in state in
TMUX_RDIPMON3[2:0] (
Table 114 on page 103
), which
occurs when a consecutive and consistent new value is
detected in the incoming G1[3:1] bits for
TMUX_CNTDRDIP[3:0] (
Table 109 on page 101
) frames on
port 3. The device monitors either G1 bit 3 or G1[3:1], depend-
ing on TMUX_REPRDI_MODE (
Table 105 on page 97
). Only
port 1 information is valid in AU-4 mode and in STS-1 mode.
The mask bit is TMUX_RRDIPM3 (
Table 97 on page 91
).
TMUX_RC2MOND3
Receive C2 (Signal Label) Monitor Delta.
This delta bit indi-
cates a change in state in TMUX_C2MON3[7:0] (
Table 114 on
page 103
), which is updated when a consecutive and consis-
tent value is detected in the incoming C2 byte for
TMUX_CNTDC2[3:0] (
Table 109 on page 101
) frames on port
3. Only port 1 information is valid in AU-4 mode and in STS-1
mode. The mask bit is TMUX_RC2MONM3 (
Table 97 on
page 91
).
TMUX_RTIMPD3
Receive Path Trace Identifier Mismatch Delta.
This delta bit
indicates a change in state in the received 16-byte J1
sequence for port 3 if the J1 mode is programmed to receive a
16-byte sequence. Only port 1 information is valid in AU-4
mode and in STS-1 mode. The mask bit is TMUX_RTIMPM3
(
Table 97 on page 91
).
TMUX_RNDFE3
Receive New Data Flag Event.
This event bit indicates that
the incoming pointer has the new data flag enabled, causing a
jump in the current pointer location for port 3. Only port 1 infor-
mation is valid in AU-4 mode and in STS-1 mode. The mask bit
is TMUX_RNDFM3 (
Table 97 on page 91
).
9
0
8
0
7
0
6
0
5
0
4
0