參數資料
型號: 82815EM
英文描述: Controller Miscellaneous - Datasheet Reference
中文描述: 控制器雜項-數據表參考
文件頁數: 117/163頁
文件大小: 1049K
代理商: 82815EM
Intel
82815EM GMCH
R
Datasheet
117
4.3.1.3.
HSEG (High Segment)
SMM-mode processor accesses to enabled HSEG are remapped to 000A0000h-000BFFFFh. Non-SMM-
mode processor accesses to enabled HSEG are considered invalid are terminated immediately on the
FSB. The exception to this is non-SMM-mode Write Back cycles. They are remapped to SMM space to
maintain cache coherency. AGP and hub interface originated cycles to enabled SMM space are not
allowed. Physical DRAM behind the HSEG transaction address is not remapped and is not accessible.
4.3.1.3.1. TSEG (Top of Memory Segment)
TSEG can be up to 1MB in size and is at the top of memory (TOM). SMM-mode processor accesses to
enabled TSEG access the physical DRAM at the same address. Non-SMM-mode processor accesses to
enabled TSEG are considered invalid and are terminated immediately on the FSB. The exception is non-
SMM-mode Write Back cycles. They are directed to the physical SMM space to maintain cache
coherency. AGP and Hub interface originated cycles to enabled SMM memory space are not allowed.
The size of the SMRAM space is determined by the USMM value in the SMRAM register. When the
extended SMRAM space is enabled, non-SMM processor accesses and all other accesses in this range
are forwarded to the hub interface. When SMM is enabled the amount of memory available to the
system is equal to the amount of physical DRAM minus the value in the TSEG register.
4.3.2.
PCI Memory Address Range (Top of Main Memory to 4 GB)
The address range from the top of main DRAM to 4 GB (top of physical memory space supported by the
GMCH2-M) is normally mapped via the hub interface to PCI. There are two exceptions to this rule:
Internal graphics configuration (GFX)
Addresses decoded to the Local Memory Range are forwarded to the GFX
Addresses decoded to the Memory Mapped Range of the internal graphics device (GFX) are
forwarded to the GFX
AGP configuration
Addresses decoded to the AGP Memory Window defined by the MBASE, MLIMIT, PMBASE, and
PMLIMIT registers are mapped to AGP.
Addresses decoded to the Graphics Aperture range defined by the APBASE and APSIZE registers
are mapped to the main DRAM.
There are two sub-ranges within the PCI Memory address range defined as APIC Configuration Space
and High BIOS Address Range. As an internal graphics device, the Local Memory Range and the
Memory Mapped Range of the internal Graphics Device
MUST NOT
overlap with these two ranges.
Similarly, as an AGP device, the AGP memory window and Graphics Aperture Window
MUST NOT
overlap with these two ranges. These ranges are described in detail in the following sections.
相關PDF資料
PDF描述
82820 Interface IC
82830009 MOTOR 12VDC 2100RPM
82830010 MOTOR 24VDC 2100RPM
82830MP Intel 830MP Chipset: 82830MP Graphics and Memory Controller Hub (GMCH-M)
82840 Interface IC
相關代理商/技術參數
參數描述
82-816-1000 功能描述:RF 連接器 ST Plug RG-108A 50 Ohm RoHS:否 制造商:Bomar Interconnect 產品:Connectors 射頻系列:BNC 型式:Jack (Female) 極性: 觸點電鍍:Gold 阻抗: 端接類型:Solder 主體類型:Straight Bulkhead 電纜類型:
82-81641 制造商:CHOMERICS (PARKER) 功能描述:
828168-1 制造商:TE Connectivity 功能描述:7P MT RV100 CONNECTOR
828168-2 功能描述:7P MT TAND BU STECK RoHS:是 類別:連接器,互連式 >> 矩形 - 自由懸掛,面板安裝 系列:AMPMODU RV 100 RoHS指令信息:5-643816-8 Statement of Compliance 3D 型號:5-643816-8.pdf 標準包裝:500 系列:MTA-100 連接器類型:插座 觸點類型::母形插口 位置數:28 間距:0.100"(2.54mm) 行數:1 行間距:- 安裝類型:自由懸掛 緊固型:鎖銷滑道 電纜端接:IDC 導線類型:離散式或帶狀纜線 線規:28 AWG 特點:閉端,帶電極標記 觸點表面涂層:錫 觸點涂層厚度:80µin(2.03µm) 顏色:綠 包裝:散裝 相關產品:A1998-ND - HEAD ASSEM TOOL FOR MTA-100 RECP
828169-1 功能描述:集管和線殼 2X7P MT TAND SOCKET CONNECTOR RoHS:否 產品種類:1.0MM Rectangular Connectors 產品類型:Headers - Pin Strip 系列:DF50 觸點類型:Pin (Male) 節距:1 mm 位置/觸點數量:16 排數:1 安裝風格:SMD/SMT 安裝角:Right 端接類型:Solder 外殼材料:Liquid Crystal Polymer (LCP) 觸點材料:Brass 觸點電鍍:Gold 制造商:Hirose Connector