Preliminary Data Sheet
May 2001
TMXF28155/51 Super Mapper
155/51 Mbits/s SONET/SDH x28/x21 DS1/E1
105
Agere Systems Inc.
8 TMUX Registers
(continued)
Table 108. TMUX_THS_POH[1
—
3]_CTL, Transmit High-Speed Control Parameters (R/W)
Address
Bit
Name
Function
Reset
Default
0x00
0
0x40036
15:9
8
—
Reserved.
TMUX_THSPREIINH1
Transmit Path REI Inhibit for Port 1.
Control bit, when set to
a logic 1, disables hardware insertion of path REI (B3 errors)
in the outgoing STM-1 (AU-4) frame G1 byte; a logic 0
enables hardware insertion of path REI. Only port 1 control is
valid in AU-4 mode.
TMUX_TPOHTHRU1
Transmit High-speed Path Overhead Insertion from Low-
speed Input (Telecom Bus).
Control bit, when set to a logic
1, causes all path overhead bytes, and H1, H2, and H3, to be
passed through from the low-speed telecom bus to the high-
speed output signal. Only port 1 control is valid in AU-4 mode.
TMUX_THSN1INS1
Transmit N1 Insert (Control) for Port 1.
Control bit, when
set to a logic 1, inserts the value in TMUX_TN1INS1[7:0]
(
Table 114
) into the outgoing N1 byte in the STS-3/STM-1
(AU-4) frame; a logic 0 allows insertion from the TPOAC chan-
nel or a default value. Only port 1 control is valid in AU-4
mode.
TMUX_THSK3INS1
Transmit K3 Insert (Control) for Port 1.
Control bit, when
set to a logic 1, inserts the value in TMUX_TK3INS1[7:0]
(
Table 114
) into the outgoing K3 byte in the STS-3/STM-1
(AU-4) frame; a logic 0 allows insertion from the TPOAC chan-
nel or a default value. Only port 1 control is valid in AU-4
mode.
TMUX_THSF3INS1
Transmit F3 Insert (Control) for Port 1.
Control bit, when set
to a logic 1, inserts the value in TMUX_TF3INS1[7:0]
(
Table 114
) into the outgoing F3 byte in the STS-3/STM-1
(AU-4) frame; a logic 0 allows insertion from the TPOAC chan-
nel or a default value. Only port 1 control is valid in AU-4
mode.
TMUX_THSF2INS1
Transmit F2 Insert (Control) for Port 1.
Control bit, when set
to a logic 1, inserts the value in TMUX_TF2INS1[7:0]
(
Table 114
) into the outgoing F2 byte in the STS-3/STM-1
(AU-4) frame; a logic 0 allows insertion from the TPOAC chan-
nel or a default value. Only port 1 control is valid in AU-4
mode.
TMUX_THSRDIPINS1
Transmit Path RDI Insert (Control) for Port 1.
Control bit,
when set to a logic 1, inserts the value in
TMUX_TRDIPINS1[2:0]
(
Table 114
) into the outgoing G1[3:1]
bits in the STS-3/STM-1 (AU-4) frame; a logic 0 allows inser-
tion from the TPOAC channel or a default value. Only port 1
control is valid in AU-4 mode.
7
0
6
0
5
0
4
0
3
0
2
0